PCB Placement Layout


How's it looking export now the best boy we have
I’ll pause further changes and export the best current board as an editable KiCad PCB snapshot. I’ll also state what remains unchecked so it isn’t mistaken for fabrication-ready output.
Sent message to Restore KiCad geometry and anchored placement
"KiCad Board Placement and Export WIP" completed.
Created a project doc

Placement Export Handoff

View Document

Placement Export Handoff User priority
User requested: export the best current board now. Further placement/repair improvements were paused; no final downloadable export was generated by the lead before execution stopped due to exhausted ACUs.
Current state, per settled build result
  • 100 × 50 mm, four-layer rectangular board retained.
  • 68 components and 74 nets remain.
  • 64 electrical footprints recovered from uploaded KiCad source; source anchor positions restored; passives placed.
  • Build result reports four 3.2 mm NPTH holes in export geometry, but four mounting-hole footprint-record errors remain. This does not mean a downloadable export was delivered.
  • No routing added.
  • Latest reported checks: zero copper shorts, floating-copper and decoupling-loop findings.
I recovered 64 electrical footprints, restored the supplied anchors, and placed the passives on the 100 × 50 mm board, but haven’t generated a downloadable export yet. The board remains unrouted WIP with mounting-hole record errors, overlap/overhang warnings, and unfinished connectivity verification; I saved the status in Placement Export Handoff.
Execution stopped because your ACUs ran out.

Waiting for input


Schematic of balancing_robot

balancing_robot