Project Start Assistance


Thought for 7 mins 28 sec
Thought for 6 sec
1/4 Inspect live PCB checks and recover prior routing-repair findings.

Inspect live PCB checks and recover prior routing-repair findings.

Repair supported routing, redundant copper, and local blockers without changing board size.

Verify final connectivity and DRC; report any remaining fabrication blockers.

Add visible schematic wires when schematic geometry editing is available (blocked; outside PCB task).

Thought for 15 sec
Thought for 5 sec
Awaiting 1 task
"USB-C Routing Cleanup" completed.
I checked the PCB and attempted local repairs, but no improvement could be safely retained; unsuccessful changes were reverted. Fresh DRC confirms 9 airwires remain—six USB data, two ground, and one output VBUS—plus 11 protected floating/redundant copper nodes, with zero copper overlaps.
The main blocker is stale USB-C breakout copper that the available recovery operation cannot replace, so the board is not fabrication-ready; this needs Contact Support before further USB routing. Exact findings are in the PCB Routing Repair Report.

Get Free Expert Help

We want to get the prototype into your hands fast. Speak with one of Flux's in-house electrical engineers to review your project.

Collins, Flux electrical engineer
Ryan, Flux electrical engineer
Nico, Flux electrical engineer

Collins, Ryan, Nico — real humans who've shipped real hardware


Waiting for input


Schematic of USB-C Device Sequencer
D11
D9
D10
D7
D5
D4
D6
F1
D2
F3
D3
F2

USB-C Device Sequencer