Passive Sourcing Final Pass
Date: 2026-10-13. Bounded continuation; no orders or CAD/component-property mutations. Existing MPNs remain assigned. Overall procurement/assembly release is NOT granted.
Item dispositions
- Completed — C2 exact stock: DigiKey K103K10X7RF53H5 direct read reports 16,006 units; enough for 12 kits. MOQ/price breaks absent from retrieved page. Prior Mouser-access blocker is superseded for stock only.
- Failed — R2 stocked alternative: exact 140 kΩ retained. Library filter returned only SMD candidates; bounded web searches did not establish direct authorized stock for a mechanically qualified axial alternative. No 143 kΩ or series-resistor workaround.
- Failed — C4 qualified stocked smaller alternative: Nichicon UMA1C100MDD mechanical facts established, but exact DigiKey listing is obsolete with no exact quantity. Substitute ECE-A1CKA100 reports 10,996 and ECE-A1CKS100 10,800, not evidence of UMA stock. Their exact maximum drawings remain unresolved. Attempted Panasonic source ABA0000C1181 is FK surface-mount, not applicable; ABA0000C1017 returned source-not-found. Neither source supports qualification. Existing Rubycon C4 residual socket-outline gap remains only 0.17 mm and not robustly approved.
- Failed — C5 qualified stocked alternative: UMA1H010MDD listing obsolete, no exact stock. Listed similar SK010M050ST stock 3,268 is not mechanically qualified. Würth 860160672002 has verified drawing facts below, but library Mouser stock 12,693 is catalog metadata, not a fresh direct authorized availability read. No assignment made. Original Rubycon maximum-drawing hold remains.
- Unattempted/out of scope: orders, full fabrication release, prototype holder support/test-fit, model/footprint changes.
UMA manufacturer drawing evidence
Official
Nichicon UMA PDF establishes UMA1C100MDD (10 µF/16 V) and UMA1H010MDD (1 µF/50 V) as 4×5 mm cases. Drawing D+0.5 and L+1 yield derived maximum body diameter 4.5 mm and length 6 mm. Nominal pitch 1.5 mm, pitch tolerance ±0.5 mm, nominal lead diameter 0.45 mm (diameter tolerance not stated); leads 15 MIN/4 MIN.
Validated result dsq_0351b0d3349b4203c17f: ds1/ds2 exact rows; ds3/ds4 maximum envelope and lead lengths; ds5/ds6 lead and pitch tolerance. Pitch explicitly confirmed by dsq_c135f87a0cd0a70be214 ds1. Immutable locators: src_page_2_tr_td_10_td_td_4_5_td_td_0_16_td_td_3_td__3ae9c67a2b; src_page_3_tr_td_rowspan_10_50_br_1h_td_td_1_td_td_4_b8ba7c4634; src_md_987b760d3b07df33; src_md_14b2ef28e3806e62.
For C4 centered at x=-11 mm, SK1 left outline x=-8.08 mm, derived nominal maximum-body gap is 2.92−2.25=0.67 mm, before seating/socket tolerance. This is an alternative-fit estimate, not an approved installed part. Availability prevents acceptance. Parent allows ordinary careful spreading of nominal 1.5 mm leads to existing 2 mm holes; identical factory pitch is not required. Form before soldering, support leads without stressing the seal, preserve negative stripe→GND and positive→VCC, and do not force or bend after soldering. No pitch-only rejection is asserted.
Würth alternative drawing evidence
Official
860160672002 PDF, result dsq_18de9c316f13c3690684 with verified ds8–ds22: 1 µF ±20%, 50 VDC maximum rated voltage; polarized, short lead and negative sleeve band identify minus; diameter 5.0±0.5 mm (derived max 5.5), height 11±1.5 mm (derived max 12.5); leads 0.5±0.02 mm (max 0.52), pitch 2.0±0.5 mm, lead lengths 5 MIN/15 MIN. Recommended pattern 2 mm spacing/0.8 mm holes directly matches existing footprint. Drawing locator src_md_22eec701e217e002; electrical and pattern locator src_md_a4e476269dda3788; mechanical-stress warning src_page_5_1_13_mechanical_stress_on_lead_wire_and_t_d652d67e34. Manufacturer prohibits excessive lead force, moving/turning after soldering, and bending pins after soldering. Library footprint name misleadingly says D4; actual drawing is D5 nominal. Existing generic capacitor visualization is retained; no visual-model reliance for physical fit.
Mutation and verification accounting
This final pass changes project documents only. Prior continuation independently inspected unchanged 18 components/8 nets, original polarity/packages, 38×38 mm outline and user rule toggles; MPN and airwire checks at 02:08:42.940Z each Success, zero errors/warnings. Final-pass fresh checks are run separately and must not be interpreted as resolving procurement or physical-fit holds. No underlying part replacement, net/value/layout edits or rule toggles performed.