# Kiln Controller (PI) ## Description Kiln controller thermocouple hat ## Project Details - **Owner:** irishthief1 - **Created:** 8/19/2025 - **Last Updated:** 8/19/2025 - **Visibility:** Public ## Key Components ### J1 — [Pin Socket 01x09 2.54mm Vertical](https://www.flux.ai/adrian95/pin-socket-01x09-254mm-vertical.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] - Pin_4 [pin 4] - Pin_5 [pin 5] - Pin_6 [pin 6] - Pin_7 [pin 7] - Pin_8 [pin 8] - Pin_9 [pin 9] ### J2 — [TerminalBlock-01x02P-5.00mm](https://www.flux.ai/vasy_skral/terminalblock-01x02p-500mm.md) - Part Type: Connector **Pins:** - P1 [pin 2] - P2 [pin 1] ### U1 — [Raspberry Pi Zero Shield](https://www.flux.ai/jharwinbarrozo/raspberry-pi-zero-shield.md) - Manufacturer Name: Raspberry Pi Foundation - Manufacturer Part Number: ADA3708 **Pins:** - ~CE0~/GPIO8 - ~CE1/~GPIO7 - 3V3[1] - 3V3[2] - 5V[1] - 5V[2] - GEN/6GPIO25 - GEN4/GPIO23 - GEN5/GPIO24 - GND[1] - GND[2] - GND[3] - GND[4] - GND[5] - GND[6] - GND[7] - GND[8] - GPIO10/MOSI - GPIO11/SCLK - GPIO12 - GPIO13 - GPIO16 - GPIO17/GEN0 - GPIO18 - GPIO19 - GPIO2/SDA - GPIO20 - GPIO21 - GPIO22/GEN3 - GPIO26 - GPIO27/GEN2 - GPIO3/SCL - GPIO4/GPCKL0 - GPIO5 - GPIO6 - GPIO9/MISO - ID_SC - ID_SD - RXD0/GPIO15 - TXD0/GPIO14 *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/irishthief1/kiln-controller-pi](https://www.flux.ai/irishthief1/kiln-controller-pi).* --- *Generated from [https://www.flux.ai/irishthief1/kiln-controller-pi](https://www.flux.ai/irishthief1/kiln-controller-pi)*