Circular LED Accelerometer PCB


i want to build a cirular pcb with an acelerometer a button in the center and 12 leds in circular pattern oraund pcb
Created a project doc

Design Brief

View Document

Design Brief Requested board
  • Circular PCB.
  • One accelerometer.
  • One pushbutton in the center.
  • Twelve LEDs arranged in a circular pattern around the PCB.
Current state
The project is empty: no components or nets have been added. No circuit, component selection, or layout has been completed.
Decisions needed
  • Desired board diameter.
  • Power source (for example, USB or battery).
  • Intended LED and button behavior, including how motion affects the LEDs.
  • Single-color versus RGB LEDs.
Next work
Confirm the requirements above, then select the control electronics, accelerometer, LEDs, and power circuitry; capture and verify the schematic before PCB layout.
Execution stopped because the account ran out of ACUs.
I saved your requirements in Design Brief: a circular PCB with an accelerometer, a center button, and 12 LEDs arranged around the perimeter. No components or wiring have been added yet.
Before building, I need the board diameter, power source, LED type (single-color or RGB), and how motion and the button should control the LEDs; schematic and layout work will require Agent mode. Execution stopped because your ACUs ran out.

Waiting for input

No schematic yet

Talk to Flux to get started.

Design Brief
Requested board
  • Circular PCB.
  • One accelerometer.
  • One pushbutton in the center.
  • Twelve LEDs arranged in a circular pattern around the PCB.
Current state
The project is empty: no components or nets have been added. No circuit, component selection, or layout has been completed.
Decisions needed
  • Desired board diameter.
  • Power source (for example, USB or battery).
  • Intended LED and button behavior, including how motion affects the LEDs.
  • Single-color versus RGB LEDs.
Next work
Confirm the requirements above, then select the control electronics, accelerometer, LEDs, and power circuitry; capture and verify the schematic before PCB layout.
Execution stopped because the account ran out of ACUs.
  • Requested board

  • Current state

  • Decisions needed

  • Next work