Alarma Láser 555

Worked for 58 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for 1 min 40 sec — Creating documentation and estimates
2/6 Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Rename project, create specification, and record initial requirements/power budget

Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Add main components and supporting passives to the schematic

Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators

Create firmware/regulatory/bring-up project files

Run schematic/design checks and fix actionable issues

Thought for 38 sec
Search Select a low-power Wi-Fi plus Bluetooth LE 5.x MCU module for a USB-C powered consumer temperature/humidity sensor node. Need 2.4 GHz 802.11 b/g/n, BLE 5.x, native USB programming preferred, integrated antenna/certified module, 3.3 V operation, suitable Flux library part..
Search Select a digital temperature and relative humidity sensor IC for an indoor consumer environmental node. Need I2C interface, 3.3 V operation, low power, good accuracy, SMD package, available Flux library part, modern non-EOL part..
Search Select a USB-C receptacle for a 5 V sink-only consumer IoT sensor node. Need USB 2.0 data pins D+ D-, CC1 CC2 pins, SMD or hybrid mechanical shell, Flux library part with footprint..
Search Select a 5 V USB input protection IC or eFuse/load switch for consumer USB-C powered IoT node. Need overvoltage protection, undervoltage lockout, overcurrent/current limit around 0.5 to 3 A capable sources, reverse-current blocking if possible, output to 3.3 V regulator, SMD Flux library part..
Search Select a 5 V to 3.3 V regulator for ESP32-class Wi-Fi sensor node. Need low quiescent current, at least 600 mA transient capability, thermally suitable for USB 5 V to 3.3 V, SMD Flux library part. Buck or thermally capable LDO acceptable..
Search Select USB ESD protection for USB 2.0 D+ D- lines and 5 V VBUS on a USB-C powered consumer IoT node. Need low capacitance data line TVS array and VBUS TVS/protection parts available in Flux library..
Creating "Project Specification" project doc.
H

hpineda417

necesito hacer una alarma con el temporizador 555 y un laser y ldr pero al corta el laser se active la alarma

flux

No se realizaron cambios: el proyecto sigue vacío, con 0 componentes y 0 redes.
Quedó pendiente diseñar la alarma con:
  • Temporizador 555 configurado para activar y mantener la alarma.
  • Láser apuntando continuamente a una LDR.
  • Umbral ajustable para detectar la interrupción del haz.
  • Zumbador o sirena como salida.
  • Etapa de transistor si la alarma requiere más corriente.
  • Filtrado para evitar disparos por ruido o cambios breves de luz.
  • Alimentación y desacoplamiento adecuados.
La ejecución se detuvo porque se agotaron tus ACUs.
Sign up to send
No schematic yet

Talk to Flux to get started.