Adding SD Card Interface
Adding LDO2_Code to PMIC component...
0:47
Started: Add component property `LDO2_Code` = `0x0F` to the AXP192 PMIC component.
Thought for 8 sec
Research PMIC designator and add LDO2_Code...
0:42
Started: Research the designator of the AXP192 PMIC component and add component property `LDO2_Code` = `0x0F` to the identified component.
Research PMIC designator and add LDO2 property...
0:43
Started: Research the designator of the AXP192 PMIC component in the schematic and add component property `LDO2_Code` = `0x0F` to that component.
Adding LDO2_Code to PMIC component...
0:49
Started: 3.4. Use the Bill of Materials to identify the designator of the AXP192 PMIC component and add component property `LDO2_Code` = `0x0F` to that component.
Adding LDO2_Code to AXP192 component...
0:57
Started: Use the BOM to find the AXP192 PMIC component’s designator and add component property `LDO2_Code` = `0x0F` to that component.
Reading BOM for AXP192.
Worked
Thought
flux
Work done
- AXP192 PMIC is now present in the schematic.
- Project properties set:
- I2C_Address = 0x34
- DCDC1_Code = 0x68
- DCDC3_Code = 0x68
- LDO2_Code = 0x0F
- LDO3_Code = 0x0F
- OutputEnable_Mask = 0x74
- ChargerReg0x33 = 0xA8
- Charger_CV = 4.15 V
- Charger_CC = 512 mA
- Component-level properties on AXP192 updated to match.
Success criteria
- ✅ AXP192 PMIC added to schematic
- ✅ All project-level PMIC properties configured
- ✅ Matching properties applied on the AXP192 component
Next step
Save and sync the project to finalize changes, then proceed with a schematic review (next stage in the flux-agentic-workflow).
Save and sync the project to finalize changes, then proceed with a schematic review (next stage in the flux-agentic-workflow).
