# 7segment driver ## Description Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template ## Project Details - **Owner:** ghoufrane - **Created:** 11/18/2024 - **Last Updated:** 11/18/2024 - **Visibility:** Public - **Copies:** 1 ## Key Components ### — [TM1637-1](https://www.flux.ai/spade/tm1637-1.md) **Pins:** - CLK [pin 18] - DIO [pin 17] - GND [pin 1] - GRID1 [pin 15] - GRID2 [pin 14] - GRID3 [pin 13] - GRID4 [pin 12] - GRID5 [pin 11] - GRID6 [pin 10] - K1 [pin 19] - K2 [pin 20] - SEG1/KS1 [pin 2] - SEG2/KS2 [pin 3] - SEG3/KS3 [pin 4] - SEG4/KS4 [pin 5] - SEG5/KS5 [pin 6] - SEG6/KS6 [pin 7] - SEG7/KS7 [pin 8] - SEG8/KS8 [pin 9] - VDD [pin 16] ### J1 — [Pin Socket 02x08 2.00mm Vertical](https://www.flux.ai/adrian95/pin-socket-02x08-200mm-vertical.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - Pin_1 [pin 1] - Pin_10 [pin 10] - Pin_11 [pin 11] - Pin_12 [pin 12] - Pin_13 [pin 13] - Pin_14 [pin 14] - Pin_15 [pin 15] - Pin_16 [pin 16] - Pin_2 [pin 2] - Pin_3 [pin 3] - Pin_4 [pin 4] - Pin_5 [pin 5] - Pin_6 [pin 6] - Pin_7 [pin 7] - Pin_8 [pin 8] - Pin_9 [pin 9] ### J2 — [Connector 01x04 Horizontal](https://www.flux.ai/jharwinbarrozo/connector-01x04-horizontal.md) - Part Type: Connector **Pins:** - PIN_1 [pin 1] - PIN_2 [pin 2] - PIN_3 [pin 3] - PIN_4 [pin 4] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/ghoufrane/7segment-driver](https://www.flux.ai/ghoufrane/7segment-driver).* --- *Generated from [https://www.flux.ai/ghoufrane/7segment-driver](https://www.flux.ai/ghoufrane/7segment-driver)*