Schematic Analysis and Corrections
0:00
- Board outline resized 10 mm beyond component extents
- Placement regions defined: Top-Middle, Bottom-Edge, Four Corners
- Placement intents set for:
- Grouping intent for motor support components set (MOSFETs Q1–Q4, diodes D1–D4, snubbers C7–C10)
- Bulk capacitors for Net 7 clustered near J1
- Decoupling cap C11 placed close to U1 and ESP32-CAM1 power pins
- Routing channels and via clearances reserved; Auto-Layout routing intent set
- ✅ [ESP32-CAM1] at top-middle
- ✅ [J1] centered on bottom edge
- ✅ Motors [M1]–[M4] in corners with their support parts grouped
- ✅ Bulk caps (C7–C10) near [J1]; decoupling cap C11 at IC pins
- ✅ Routing intents defined; ready for DRC review
1d 20:6:11
Reviewing connection procedure.
Confirming connections and intent.
Verifying schematic connections.
Planning action for ground connections.
Analyzing the schematic.
Reading docs about How to add and connect a ground plane in Flux PCB layout, including creating GND copper fills, pad thermal/solid connection settings, and stitching vias to ensure components on the GND net (e.g., R5 P2, R6 P2, R7 P2, R8 P2) connect directly to the plane..
Checking if I can make the changes for you.
Summarizing help and tools.
Made updates
0:23
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.