Finding LCD 16x2 Module
Thought for 2 mins 51 sec
Here are the components to add for your relay driver circuit:
Table
| Part Name | Manufacturer Part Number | Quantity | Footprint | Datasheet | Manufacturer |
|---|---|---|---|---|---|
| 2N2222A | 2N2222A | 1 | TO-92 | @___ | ___ |
| 1N4001 | 1N4001 | 1 | DO-41 | @___ | ___ |
| Resistor 10 kΩ 5 % | 10 kΩ Resistor | 1 | 0603 | ___ | ___ |
Let me know if you’d like me to wire them up for your relay control!
Thought for 25 sec
- Added 1x 2N2222A as Q1
- Added 1x 1N4001 - 8363396 as D8
- Added 1x Generic Resistor as R1
now connect all of them together
Thought for 2 mins 59 sec
Here are the net connections for the relay driver circuit:
Table
| Net | Connections |
|---|---|
| RELAY_CTRL | U1:GPIO4, R1:1, Q1:Base |
| RELAY_COIL+ | K1:Coil+, D8:Cathode |
| RELAY_COIL- | K1:Coil–, Q1:Collector, D8:Anode |
| GND | U1:GND, Q1:Emitter |
Let me know if you’d like to apply these changes.
Thought for 40 sec
- Connected U1:D4 to R1:P1
- Connected R1:P1 to Q1:B
- Connected K1:Coil-1 to D8:K
- Connected K1:Coil-2 to Q1:C
- Connected Q1:C to D8:A
- Connected U1:GND to Q1:E
