Fixing Missing Routed Traces

flux

0:50

Reading docs about How do I fix an Airwires review error in Flux that reports missing routed traces between pads in a net?.

Running design review.

Analyzing the PCB layout.

This error means Flux sees pads on the same net that are not physically connected by routed copper. That is exactly what the Airwires check reports: missing routed traces between pads in a net
For your specific case:
  • ADHESION_1 P1 is on the Top layer
  • ADHESION_2 P1 is also on the Top layer
  • Both P1 pads are assigned to the same net, +BAT_RAW
  • So the fix is to route copper between those two pads, or remove/change the net assignment if they were not meant to be connected
What to do:
  1. In PCB view, select the airwire for +BAT_RAW between ADHESION_1 and ADHESION_2.
  2. Route a trace on the Top layer from P1 to P1.
  3. Recheck the review.
Important:
  • Your layout has plenty of board space, so this looks like a straightforward missing route, not a congestion problem.
  • The project currently has many Airwires errors, not just this one, so fixing these two pads may clear only one of many unrouted nets.
If +BAT_RAW on those two pads was accidental, then the real fix is on the schematic side:
  • disconnect or rename that net so they are no longer both on +BAT_RAW.
If you want, I can inspect whether ADHESION_1 and ADHESION_2 are supposed to be on +BAT_RAW, and tell you whether to route them or change the net.
Inspect net intent
Check other airwires
Review +BAT_RAW path
15 days
Sign up to send
J3 CC2 - R2 P1
U2 ILIM - R3 P1
L1 P2 - IC1 VOS
J3 V-BUS__1 - C1 P1
IC1 SW - L1 P1
IC1 EN - C3 P1
L1 P2 - IC1 VOS
IC1 SW - L1 P1
J3 V-BUS__1 - C1 P1
IC1 VSET - R6 P1
IC1 EN - C3 P1
U2 ISET - R4 P1
J3 CC1 - R1 P1
IC1 VSET - R6 P1
U2 TS - R5 P1
L1 P2 - IC1 VOS
U2 BAT_2 - C4 P1
R3
Resistance
1.18kΩ
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
R2
Resistance
5.1kΩ
J3 SHIELD__3 - J2 2
R4
Resistance
1.13kΩ
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
R6
Resistance
523kΩ
R1
Resistance
5.1kΩ
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
J3 SHIELD__3 - J2 2
R5
Resistance
10kΩ
J3 SHIELD__3 - J2 2
L1
Inductance
2.2uH
C5
Capacitance
4.7uF
C4
Capacitance
4.7uF
C3
Capacitance
4.7uF
C6
Capacitance
10uF
C2
Capacitance
1uF
C1
Capacitance
10uF
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.8k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M

ESP32-S3 Module Integration

ESP32-S3 Module Integration thumbnail
Integration baseline for an Espressif ESP32-S3-WROOM-1-N16R8 module with integrated PCB antenna, native USB, 16MB flash, and 8MB PSRAM. This project currently documents selection constraints, power and boot requirements, RF keepout expectations, and acceptance criteria for later schematic and PCB implementation.

Properties

16MB Flash + 8MB PSRAM

SMD module 25.5mm x 18.0mm

3.3V

General-purpose digital I/O plus native USB; reserve boot/programming pins and avoid loading strapping pins during reset.

Wi-Fi + Bluetooth MCU Module

ESP32-S3-WROOM-1-N16R8

Power path: USB-C VBUS -> BQ24075 IN, LiPo JST -> BQ24075 BAT, BQ24075 OUT/SYS -> TPS62840 VIN, TPS62840 -> 3V3 rail. CC1/CC2 each use 5.1k Rd to GND. Payload output uses low-side NMOS switching with flyback diode across the external inductive load; diode cathode to +BAT_RAW and anode to 15W_PAYLOAD.

Native USB or UART programming interface

Use integrated antenna module only; no copper, traces, or ground pour under antenna keepout; place module at board edge for RF clearance; provide EN reset path, BOOT path on GPIO0, solid ground reference outside antenna zone, and accessible USB D+/D- or UART0 programming interface.

Espressif Systems

2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE via integrated PCB antenna

USB-C 5V input and single-cell 3.7V LiPo battery with BQ24075 charger/power-path feeding TPS62840 3.3V buck rail for ESP32-S3 and future sensors

Pricing & Availability

Distributor

Qty 1

Controls