Create a file which documents ALL of the changes which we've made to the board . Every change since the initial KiCad drawing. It should be in Markdown
I’ll create a Markdown change history covering the work since the KiCad import, including reverted changes, accepted risks and the latest M4-hole/board-size changes. I’ll append the current manufacturing-rule values you requested, distinguishing verified settings from anything unspecified; no board edits.
Created Board Change History in your project files. It documents the recorded changes since the KiCad import—including connectors, routing, test pads, silkscreen, M4 holes and the 87 × 77 mm outline—and appends the manufacturing-rule values, marking unknown settings explicitly.
The file distinguishes applied changes, abandoned proposals and accepted risks, and flags the previous manufacturing ZIP as outdated. No schematic or PCB changes made.
Created Board Change History in Markdown, covering recorded changes since the KiCad import, including connector consolidation, routing, test pads, silkscreen, accepted risks, and the latest M4 holes and 87 × 77 mm board expansion.
The appendix includes track width, clearance, via/drill sizes, solder-mask expansion and board-edge clearance. Paste expansion and explicit minimum via-size settings are marked unknown, rather than assumed. The history is reconstructed from saved records and live inspection—not a guaranteed exhaustive commit-by-commit diff.
No board changes were made. The previous manufacturing ZIP remains outdated following the hole and outline changes; fresh verification and exports are still needed.
ARCHIVED — 2026-10-22. Historical closeout record. Phase 7 has since been completed and closed; the “Phase 7 remains unstarted” line below is historical. Current status: Import Review and Plan — authoritative status.
Closed — 2026-10-21
Phase 6 preparation is complete. The authoritative outcome, evidence limits, scoped checks and Phase 7 boundary are recorded at the top of Import Review and Plan.
Original surface-mount Pico part retained; no replacement applied.
Optional extra digital-ground lands are not mandatory mapping blockers. AGND remains separately dispositioned for the current unused ADC interface.
Live GND3 escape reaches a through via on /GND; no U1 ground airwire is reported. Phase 7 still must assess the complete supply-return layout and current margin.
Fresh selected checks at 2026-10-21T22:14:16.326Z: zero via-in-pad, overlapping-copper, floating-copper or under-connected-via findings; 15 airwires remain.
Seven remaining airwires belong to Phase 7 supplies/returns; eight belong to Phase 8 signals.
No board changes during this closeout. Antenna-layout compromise retained. Phase 7 remains unstarted and requires approval.
This replaces the earlier incomplete checkpoint; do not restart the abandoned all-ground-pad replacement solely from historical blocker wording.