WiFi & Bluetooth Sensor Node


Created 3 project docs

Firmware Starter — SiWG917 USB-C WiFi/BLE T/RH Sensor

View Document

MCU module: U1 — SIWG917Y111MGABAR, Silicon Labs SiWG917 Wi-Fi 6 + BLE 5.4 module Recommended SDK: Silicon Labs WiSeConnect SDK / Simplicity...

Board Bring-Up Plan — USB-C WiFi BLE TH Sensor

View Document

Equipment: USB-C current meter or current-limited 5 V supply, DMM, oscilloscope, SWD debugger, 3.3 V USB-UART adapter. Firmware: use the Fir...

Technical Construction File — USB-C WiFi BLE TH Sensor

View Document

Draft — schematic-stage regulatory file. [ ] FCC Part 15 intentional radiator / unintentional radiator
Schematic wiring is complete and I created firmware, bring-up, and regulatory files. I’m running ERC/DRC-style checks now and will fix real electrical issues; any remaining schematic-geometry warnings will be called out separately.
Implemented the schematic for the USB-C powered Wi‑Fi/BLE temperature/humidity node. It uses a SiWG917 Wi‑Fi/BLE 5.4 module, SHT41 T/RH sensor, USB-C sink input, TPS25940 true reverse-blocking eFuse with OVP/UVLO/OCP/soft-start, MP28301 3.3 V buck regulator, ESD protection, reset/ISP/SWD debug, I2C pull-ups, and status LED.
Created project files:
Open items:
  • PCB layout/routing is not done yet, so airwire DRC errors are expected.
  • Generic passives still need final manufacturer MPNs before manufacturing export.
  • Layout must enforce the SiWG917 antenna keepout and thermal isolation around the SHT41.
Suggested next steps:
  1. Set board size/stackup and move into PCB placement.
  2. Place U1 at the board edge with antenna keepout and U4 away from heat sources.
  3. Route power, buck, I2C, SWD/UART, and USB-C protection paths.
  4. Assign final passive MPNs and run full DRC/manufacturing checks.
Place route and MPNs
Start PCB placement
Assign passive MPNs
Route the PCB
Run full review

Demo Complete

The guided demo is finished. You watched Flux replay a real design session in this read-only project. Sign up to build your own project.


Schematic of USB-C WiFi BLE TH Sensor
D1
J1
U1

USB-C WiFi BLE TH Sensor