ESP32-S3 Board Design

Received notification from "ESP32-S3 Schematic Review" that it finished — picking the work back up.
Thought for 9 mins 36 sec
Thought for 12 sec — Addressing schematic issues
Steering ESP32-S3 Schematic Design…
Thought for 7 sec
Awaiting 1 background task
Received notification from "ESP32-S3 Schematic Design" that it finished — picking the work back up.

flux

Built the complete 44-component, 40-net ESP32-S3-FN8 schematic with native USB-C, protected power input, TLV62568 buck regulator, crystal, u.FL RF path, reset/boot buttons, and an 18-GPIO breakout. Independent review corrections were applied, including 22 Ω USB resistors and a low-capacitance RF ESD device.
Open items
  • Confirm final footprint/DRC status for the ESP32 exposed-pad structure.
  • Configure the 10–12 mm-wide, ≤100 mm-long 4-layer PCB.
  • Complete single-column placement, routing, ground planes, and zero-error DRC closure.
  • Finish firmware/compliance documentation and final manufacturing verification.
  • Execution is paused because the account currently has no available ACUs.
Check ESP32 footprint
Define board layout
Review schematic integrity
Review BOM readiness
Document bring-up
Sign up to send

Files

Pins

Symbol

Layout

Preview

Name
TOON thumbnail