# Arduino Uno/Bluno Shield Template ## Description Template for a shield connected to an Arduino Uno/Bluno. Note, the pin out for this was designed specifically for a Bluno, but it should be pin compatible with an Arduino Uno ## Project Details - **Owner:** erickparra - **Created:** 3/2/2024 - **Last Updated:** 3/2/2024 - **Visibility:** Public ## Key Components ### J1 — Pin Header 01x08 2.54mm Vertical Bottom Layer - Part Type: Connector **Pins:** - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 ### J2 — Pin Header 01x06 2.54mm Vertical Bottom Layer - Part Type: Connector **Pins:** - Pin_1 - Pin_2 - Pin_3 - Pin_4 - Pin_5 - Pin_6 ### J3 — Pin Header 01x10 2.54mm Vertical - Part Type: Connector **Pins:** - Pin_1 - Pin_10 - Pin_2 - Pin_3 - Pin_4 - Pin_5 - Pin_6 - Pin_7 - Pin_8 - Pin_9 ### J4 — Pin Header 01x08 2.54mm Vertical Bottom Layer - Part Type: Connector **Pins:** - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/erickparra/arduino-unobluno-shield-template~y7](https://www.flux.ai/erickparra/arduino-unobluno-shield-template~y7).* --- *Generated from [https://www.flux.ai/erickparra/arduino-unobluno-shield-template~y7](https://www.flux.ai/erickparra/arduino-unobluno-shield-template~y7)*