Recherche d'Anneau LED Adressable
0:26
Thinking deeply about your request.
Analyzing the PCB layout.
Analyzing the schematic.
Tu veux vider complètement le projet, schéma et PCB, pour repartir de zéro.
- Le plan est prêt :
- supprimer les 385 composants et 65 nets du schéma
- supprimer tous les éléments du PCB existant
- vérifier que le projet est totalement vide
- laisser une base propre pour recommencer
Clique sur Start dans la barre du plan pour lancer l’exécution.
Plan
- Completely reset the ESP32-S3 Pico project to a blank state by removing all schematic elements, component nets, PCB elements including copper zones, board outline, layout rules, and any other residual settings.
#Implementation plan
- Clear Schematic
- Remove all schematic components.
- Delete all net connections so that no nets remain defined.
- Reset PCB Layout
- Remove all placed components from the PCB layout.
- Erase PCB copper zones, traces, and fill zones.
- Delete the board outline and any mechanical layers.
- Reset Project Rules
- Remove all PCB rules and constraints configured in the project.
- Clean Up
- Verify that the project configuration, including design rules and properties, is completely reset for both schematic and PCB.
#Success criteria
- No schematic components or net connections remain in the project.
- The PCB layout is completely cleared, lacking any copper zones, board outlines, or placement of components.
- All rules and project-specific settings have been removed, yielding a blank slate for a fresh design.
25 days
Supprime aussi les règles, contours et zones cuivre du PCB pour repartir totalement à zéro.
25 days
0:43
Thinking deeply about your request.
Planning project context.
Working on your request.
Planning in French.
Tu veux remettre complètement ce projet à zéro, y compris schéma, PCB, règles, contour et zones cuivre.
- Le plan est prêt : suppression totale du schéma, réinitialisation complète du PCB, puis nettoyage des règles et vérification finale.
- C’est bien le bon flux pour une opération globale de ce type, qui touche de nombreux objets du projet
Clique sur Start dans la barre du plan pour lancer l’exécution.
Plan
- Completely reset the ESP32-S3 Pico project to a blank state by removing all schematic elements, component nets, PCB elements including copper zones, board outline, layout rules, and any other residual settings.
#Implementation plan
- Clear Schematic
- Remove all schematic components.
- Delete all net connections so that no nets remain defined.
- Reset PCB Layout
- Remove all placed components from the PCB layout.
- Erase PCB copper zones, traces, and fill zones.
- Delete the board outline and any mechanical layers.
- Reset Project Rules
- Remove all PCB rules and constraints configured in the project.
- Clean Up
- Verify that the project configuration, including design rules and properties, is completely reset for both schematic and PCB.
#Success criteria
- No schematic components or net connections remain in the project.
- The PCB layout is completely cleared, lacking any copper zones, board outlines, or placement of components.
- All rules and project-specific settings have been removed, yielding a blank slate for a fresh design.
Supprime aussi les composants
Réinitialise le stackup
Vérifie les restes
25 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.