PCB Design Workflow

ov2319

ok finish

60 days

flux

1:10

Organizing manufacturing details.

I’ll finish this project to a manufacturable, routed board. Here’s the plan I’ll run:

Complete schematic: resolve dangling nets (including Net 35), verify power rails/portals, add required supporting passives per datasheets.
Run ERC and fix issues; validate BOM entries and footprints.
Prepare PCB: confirm rules/stackup, then use Auto‑Layout to place and route.
Run DRC and resolve violations; iterate until clean.
Finalize availability and export Gerbers, BOM, and pick‑and‑place.

Click Start on the plan bar to execute.

Plan

#Goal

Complete the ESP32 smart scale project by finishing the schematic, resolving ERC/DRC issues, auto‑layout and route the PCB, and preparing manufacturing outputs to achieve a fully manufacturable design.

#Implementation plan

Schematic Completion and Review
1. Complete all schematic connections including resolving dangling nets (e.g., Net 35).
2. Verify power rails (PP12V0, PP5V0, PP3V3, PP3V3_L) and net portals are correctly connected.
3. Add any required supporting passives as per datasheet recommendations for parts such as the ESP32‑C3, NAU7802 ADC, NCP176B 3.3 V LDO, and TPS62130 buck regulator.
ERC Validation and Correction
1. Run ERC and identify issues such as missing pull‑ups, decoupling capacitors, or voltage ratings mismatches.
2. Correct ERC warnings by connecting pull‑ups to the I2C bus (I2C_SCL, I2C_SDA) or other required connections and confirming BOM entries and footprints.
PCB Preparation and Auto‑Layout
1. Finalize the PCB stackup and core design rules.
2. Utilize Auto‑Layout to effectively place all components including the ESP32‑C3 module (IC1), NAU7802 ADC (U1), NCP176B (U2), TPS62130 (U3), USB‑C connector (J2), microSD (J1), and pin headers (J4/J5), ensuring signal integrity on I2C, SPI, and GPIO nets.
3. Auto‑route nets and verify all connections, ensuring there are no missed connections or routing conflicts.
DRC Run and Optimization
1. Run DRC and resolve clearance or rule violations.
2. Adjust PCB layout rules as needed to clear design rule issues and route problem areas.
Finalization and Manufacturing Outputs
1. Review component availability and update project properties if necessary.
2. Export manufacturing files including Gerber files, BOM, and pick‑and‑place outputs.

#Success criteria

All schematic connections are complete with no dangling nets or unconnected pins.
ERC and DRC run without errors or warnings, addressing pull‑ups and decoupling as required.
Auto‑Layout has successfully placed and routed all components with complete net connectivity.
Final project outputs (Gerbers, BOM, pick‑and‑place files) are generated and ready for production.

Fix Net 35 first

Run ERC check

BOM availability/cost

Prep for auto-layout

60 days

PP5V0

Resistance

10kΩ

PG_PP5V0

USBC2.0_D_N

SPI_MISO

PP3V3

SPI_SCK

USBC2.0_D_P

PP3V3_SPI

SPI_SCK

INT_ADC_DRDY

PP3V3

GPIO_SW1

I2C_SDA

GPIO_SW2

SPI_MISO

PP12V0

SPI_MOSI

I2C_SCL

SPI_CS

VOS

PP3V3

SPI_CS

SPI_MOSI

Capacitance

1uF

C13

Capacitance

1uF

C18

Capacitance

1uF

Manufacturer Part Number

OPT

C10

Capacitance

1uF

C25

Capacitance

22uF

C15

Capacitance

1uF

Resistance

100kΩ

Inductance

2.2nH

Resistance

953kΩ

IC1

C22

Capacitance

10uF

MCU_TXD

Capacitance

1uF

Capacitance

13pF

C21

Capacitance

10uF

C12

Capacitance

1uF

Capacitance

1.2pF

C24

Capacitance

1uF

Resistance

180kΩ

C30

Capacitance

10uF

Inductance

2.2nH

MCU_RXD

C31

Capacitance

.1uF

MCU_BOOT

Capacitance

13pF

Inductance

2.2uH

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

ESPRSSO32 Smart Scale AI Auto Layout [Example]

Description

Learn how to use AI Auto Layout on this ESP32 Espresso Smart Scale! In one click you’ll see AI Auto Layout perform magic. Pay close attention to how we recommend creating rulesets, zones, and fanouts. By copying the setup in this example on your own project, you’ll have a fully routed board in no time!

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1

Controls

Welcome 👋

Flux accelerates your PCB design with AI.

Create your account to start using this component and bring your ideas to life.