PCB GND Repair


I’ll use horizontal entry and AWG 24–16 with those ratings as the provisional requirements, then check the remaining footprint and assembly details. PCB changes will stay on hold until NextPCB confirms sourcing and SMT acceptance.
Thought for 1 min 39 sec
Thought for 9 sec
Thought for 6 sec
Awaiting 1 task
revise the board with these ocmponents
I’ll prepare a separate SMT revision using the selected Phoenix terminals, preserving this release and every controller input. NextPCB acceptance will remain an open manufacturing gate, and I won’t create a footprint from guessed dimensions.
Thought for 2 mins 36 sec
Thought for 7 sec
Thought for 7 sec
Awaiting 1 task
"Pixel Board Manufacturing Readiness" completed.
The revision is blocked on the connector drawings—not your design choices. I confirmed the electrical pads, but couldn’t reliably obtain the mechanical-hole positions and pin-1 orientation, so I haven’t guessed footprints or changed the released board.
Please download and upload the PCB footprint/CAD file or dimensioned drilling-plan drawing for Phoenix 1824572 and 1824857, from each product’s “Downloads” or “3D view and CAD download” section. Those files will let me build the separate revision while preserving the controller connector and all input signals.
NextPCB sourcing and assembly acceptance also remain unconfirmed; the prepared enquiry covers both parts and the turnkey promotion requirements.

Schematic of Pixel Board restored from version #67823eac

Pixel Board restored from version #67823eac

Pixel Board restored from version #67823eac thumbnail