Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Simulate a circuit

Prepare for Manufacturing

Component Selection Workflow

New Subsystem Wizard

Part Type

Integrated Circuit

Designator Prefix

Manufacturer Name

Aerosemi

how do I connect U2 and M1?

dinesh6379

@copilot how do I connect U2 and M1?

copilot

To connect the MT3608 (U2) and the Texas Instruments power management IC (M1), here are the specific connections you need to make:

Input Power Connection:
- Connect the power output from the solar panel (SOLAR+) on M1 to the input pin (IN) on U2.
- Connect M1:3 (SOLAR+) to U2:5 (IN).
Ground Connections:
- Connect the ground pin on M1 to the ground pin on U2.
- Connect M1:2 (GND) to U2:2 (GND).
Enable Pin:
- If you want to control the enable status of the MT3608, you can connect it to an appropriate control pin, such as the VBAT_OK signal from M1.
- Connect M1:4 (VBAT_OK) to U2:4 (EN).

These connections will allow the booster circuit (U2) to be powered by the solar input from M1 and provide a regulated boosted output voltage.

Would you like to make any other specific connections or is there anything else you need help with?

how do I connect U2 and M1?

dinesh6379

@copilot how do I connect U2 and M1?

copilot

To connect the power manager IC M1 and the boost converter U2, follow these steps:

Power Input from Battery Management IC M1:
- Connect M1:BAT to U2:IN. This connection will supply power to the boost converter.
Ground Connection:
- Connect M1:GND to U2:GND. This ensures a common ground between the two components.
Enable Pin:
- You may want the boost converter to be enabled whenever the battery management IC indicates a valid battery. Connect M1:VBAT_OK to U2:EN.

Summary of Connections:

Connect M1:BAT to U2:IN.
Connect M1:GND to U2:GND.
Connect M1:VBAT_OK to U2:EN.

Would you like any more details on the connections?

create a detailed step by step plan table for D1, CC1, BAT\_ADC, USB\_N, CS, C5,...

dinesh6379

@copilot create a detailed step by step plan table for D1, CC1, BAT_ADC, USB_N, CS, C5, BUTTON_3, CC2, BOOT, C4, C3, USB_N, SW2, R3, R1, U3, SDA, BUTTON_4, 5V, U2, USB_P, SCL, C1, RST, R2, CC2, CS, DC, SDA, J1, SCL, DC, BOOT, EN_RST, 3V3, C7, BUTTON_1, U1, 3V3, USB_P, VBUS, RST, VBAT, EN_RST, 3V3, 3V3, USB_N, CC1, C2, C6, BUTTON_2, USB_P, SW1 to verify their functionality.

copilot

Sure! Here’s a detailed step-by-step verification plan for the components listed:

Verification Plan

Step	Component	Action	Expected Outcome
1	D1	Connect 1 (K) to +5V and 2 (A) to GND	Check if the diode is forward biased and current flows
2	CC1	Measure the voltage at pin 1	Ensure it matches the reference voltage for CC1
3	BAT_ADC	Measure voltage	Voltage at P1 should correspond to $V_{BAT}$ level
4	USB_N	Measure differential signal	Ensure proper communication with USB
5	CS	Measure signal	Ensure communication with required interface
6	C5	Measure capacitance between P1 and P2	Should read 0.1 $\mu$ F
7	BUTTON_3	Press button and measure continuity	Button press should show continuity
8	CC2	Measure voltage at pin 1	Ensure it aligns with system design
9	BOOT	Check boot pin status	Should initiate boot operations
10	C4	Measure capacitance	Should be 0.1 $\mu$ F
11	C3	Measure capacitance	Should be 10 $\mu$ F
12	USB_N	Check data lines for activity during communication	Confirm USB data transfer
13	SW2	Press button and measure continuity	Should show continuity when pressed
14	R3	Measure resistance	Should be 5.1k $\Omega$
15	R1	Measure resistance	Should be 10k $\Omega$
16	U3	Apply voltage at $V_{IN}$ and measure $V_{OUT}$	$V_{OUT}$ should be +3.3V
17	SDA	Check signal integrity	Ensure proper data transfer on I2C
18	BUTTON_4	Press button and measure continuity	Should show continuity when pressed
19	5V	Measure voltage	Should show +5V
20	U2	Initialize and run a simple program	Confirm operation of STM32WB5 microcontroller
21	USB_P	Measure differential signal	Ensure proper communication with USB
22	SCL	Check signal integrity	Ensure proper clock signal on I2C
23	C1	Measure capacitance	Should be 10 $\mu$ F
24	RST	Measure signal when reset is triggered	Confirm system reset occurs
25	R2	Measure resistance	Should be 5.1k $\Omega$
26	CC2	Measure voltage at pin 1	Ensure it aligns with USB-C configuration
27	CS	Measure signal	Confirm proper operation in the interface
28	DC	Measure signal	Ensure proper data communication
29	SDA	Check signal integrity	Validate data line operation on I2C
30	J1	Test connection	Ensure all pins are properly connected
31	SCL	Check signal integrity	Validate clock line operation on I2C
32	DC	Measure signal	Confirm proper operation
33	BOOT	Check boot pin status	Confirm boot operations initiate correctly
34	EN_RST	Measure signal	Confirm enable/reset functionality
35	3V3	Measure voltage	Should be +3.3V
36	C7	Measure capacitance	Should be 1 $\mu$ F
37	BUTTON_1	Press button and measure continuity	Should show continuity when pressed
38	U1	Test display	Ensure LCD driver functions properly
39	3V3	Measure voltage	Should be +3.3V
40	USB_P	Measure differential signal	Confirm proper USB communication
41	VBUS	Measure voltage	Should be +5V
42	RST	Apply reset	Confirm system reset
43	VBAT	Measure voltage	Should be battery voltage level
44	EN_RST	Apply enable/reset signal	Confirm function
45	3V3	Measure voltage	Should be +3.3V
46	3V3	Measure voltage	Should be +3.3V
47	USB_N	Ensure proper connection for USB data	Verify USB connection
48	CC1	Measure voltage	Ensure it meets required levels
49	C2	Measure capacitance	Should be 0.1 $\mu$ F
50	C6	Measure capacitance	Should be 1 $\mu$ F
51	BUTTON_2	Press button and measure continuity	Should show continuity when pressed
52	USB_P	Ensure proper connection for USB data	Verify USB connection
53	SW1	Press button and measure continuity	Should show continuity when pressed

Each step can be carried out using standard equipment like a multimeter, an oscilloscope, and a function generator when needed. Let me know if you need details on any specific step or equipment required!

create a high level mermaid block diagram of D1, CC1, BAT\_ADC, USB\_N, CS, C5, ...

dinesh6379

@copilot create a high level mermaid block diagram of D1, CC1, BAT_ADC, USB_N, CS, C5, BUTTON_3, CC2, BOOT, C4, C3, USB_N, SW2, R3, R1, U3, SDA, BUTTON_4, 5V, U2, USB_P, SCL, C1, RST, R2, CC2, CS, DC, SDA, J1, SCL, DC, BOOT, EN_RST, 3V3, C7, BUTTON_1, U1, 3V3, USB_P, VBUS, RST, VBAT, EN_RST, 3V3, 3V3, USB_N, CC1, C2, C6, BUTTON_2, USB_P, SW1. Include key component's manufacturer part number in each block whenever possible.

copilot

Sure, here is a high-level Mermaid block diagram capturing the essential components and their connections:

Diagram

The diagram captures high-level connections between key components and includes the manufacturer's part number wherever available. This should give you a clear view of the relationships between the main components in your climate control system design.

how do I connect U2 and M1?

dinesh6379

@copilot how do I connect U2 and M1?

copilot

To connect the MT3608 (U2) boost converter to the power manager IC (M1), you need to follow these steps:

Connections

Power Input from Battery and Solar Panel:
- Connect M1:BAT to the positive terminal of the battery.
- Connect M1:GND to the negative terminal of the battery.
- Connect M1:SOLAR to the positive terminal of the solar panel.
Connecting the Boost Converter Input:
- Connect M1:BAT to U2:IN.
- Connect M1:GND to U2:GND.
Enable Pin:
- Connect M1:VBAT_OK to U2:EN (if you want the boost converter to be enabled when the battery voltage is okay).

Summary of Connections

Connect M1:BAT to U2:IN.
Connect M1:GND to U2:GND.
Connect M1:VBAT_OK to U2:EN.

Would you like any additional components or connections for this setup?

list all D1 pins in a table format. For each pin provide its pin number, pin nam...

dinesh6379

@copilot list all D1 pins in a table format. For each pin provide its pin number, pin name and function.

copilot

Sure! Here's the table listing all the pins for D1 along with their pin numbers, names, and functions:

Table

Pin Number	Pin Name	Function
1	K	Cathode - Negative terminal of the diode
2	A	Anode - Positive terminal of the diode

Let me know if you need any further details!

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

Climate Control System Reference Design uj73

Description

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

Properties

License

creativecommons.org/licenses/by/4.0/

Pricing & Availability

Distributor	Qty 1
Digi-Key	$1.25–$2.91
LCSC	$0.45–$0.54
Mouser	$2.05
Verical	$0.08

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

dinesh6379 / Climate Control System Reference Design uj73

Schematic