USB-C Sensor Node
Worked for 40 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for 1 min 40 sec — Creating documentation and estimates
2/6 Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for a moment
Thought for 7 sec
No project changes were made; the schematic remains empty. The attached 12 V NE555/LM1949 injector-driver circuit appears unrelated to the requested USB‑C environmental sensor node, and I’m currently unable to inspect the manual or execute design work because no ACUs are available.
Remaining work: select the Wi‑Fi/BLE MCU and T/RH sensor, design the USB‑C 5 V protection/power path and 3.3 V rail, capture the schematic, and verify ERC/power margins.
Brainstorm project ideas
Analyze attached manual
Document circuit mismatch
No schematic yet
Talk to Flux to get started.
No layout yet
When components get added to the schematic, they'll show up here.