The project is still blank: no STM32F7 flight-controller schematic, components, nets, PCB, or documentation were created.

The intended scope is an ArduPilot-compatible STM32F7 flight controller, but key selections remain open, including the exact MCU, IMU redundancy, barometer, power architecture, interfaces, connector standard, board dimensions, and target ArduPilot hardware definition.

Execution stopped because your ACUs ran out.

No. The project is still blank—no schematic, components, PCB layout, or ArduPilot configuration was created. Execution stopped because your ACUs ran out.

To increase ACUs, open Flux account settings → Billing/Usage and upgrade your plan or purchase additional ACUs if that option is available for your account.

If no purchase or upgrade option appears, contact Flux support: https://docs.flux.ai/Introduction/getting-support. Your current project remains unchanged.