Project Idea Start
Thought for 3 mins 36 sec
1/3 Add verified C381116 as J4 and connect it only to VIN_RAW/GND
Add verified C381116 as J4 and connect it only to VIN_RAW/GND
Place J4 without moving existing parts and add both requested silkscreen notes
Verify 36/27 counts, exact net diff, J1 unchanged, and ERC
Thought for 16 sec
Steering WLED Analog Driver Schematic…
Created a thread
WLED Analog Driver Schematic
Completed
View Thread
Thought for 7 sec
Awaiting 1 background task
Received notification from "WLED Analog Driver Schematic" that it finished — picking the work back up.
Worked for 1 min 57 sec
I found a scope violation during reconciliation: adding/placing J4 shifted many existing PCB components (including J1), despite the executor’s report. I’m preserving the current state in a named snapshot, then I’ll restore pre-J4 placement while retaining J4, its two intended net additions, and both silkscreen notes.
Worked for 18 sec
Cloned a project
RGBW Driver - Pre Placement Restoration Snapshot 2026-09-03
Welcome to your new project. Imagine what you can build here.
Reconciliation found an unintended PCB placement shift affecting many existing components, including J1. I created the required snapshot: RGBW Driver - Pre Placement Restoration Snapshot 2026-09-03.
Current project state:
- J4 and both silkscreen notes are present.
- J4 pin 1 added to
VIN_RAW; pin 2 added toGND; pin 3 is intentionally NC. - Schematic has 36 components and 27 nets.
- ERC still has the three accepted
+5V_DRVmissing-power-driver errors. - Existing PCB placements still need restoration to their pre-J4 coordinates; no restoration mutations were made.
Execution stopped because your ACUs ran out.
Waiting for input
