EMG Schematic Layout Cleanup
Thought for 3 mins 20 sec
Thought for 7 sec
Managing 1 task
Thought for 7 sec
2/2 Verify schematic readability and unchanged electrical connections; identify remaining cleanup.
Arrange and draw all functional blocks without changing connectivity.
Verify schematic readability and unchanged electrical connections; identify remaining cleanup.
Thought for 10 sec
Awaiting 1 task
"Schematic Drafting Review" completed.
Thought for 36 sec
The connectivity comparison confirms that all 49 nets still connect the same pins. The readability check found more work in the op-amp stages and electrode-jack wiring, which I’m correcting now.
Thought for 26 mins 21 sec
Thought for 8 sec
Awaiting 1 task
"STM32 EMG Schematic Layout" completed.
Thought for 50 sec
The analog stages now have drawn signal paths, but a wire-placement bug on flipped symbols is blocking part of the USB drawing. I’ll leave the affected connections labeled and finish the independent label fixes; the bug needs Contact Support.
Thought for 8 mins 11 sec
Thought for 10 sec
Thought for 9 sec
Awaiting 1 task
"STM32 EMG Schematic Layout" completed.
Worked for 1 min 34 sec
I arranged all 78 components into eight functional blocks and added local wires and net labels. All 49 nets retain exactly the same pin connections; no electrical connections changed.
The drawing is not fully clean: wire crossings and label crowding remain, and a flipped-symbol wire-placement bug blocks the shared USB power wire. That bug needs Contact Support; the remaining drafting cleanup is still open.
