DECT NR Plus Intercom

flux

Understood. When ACUs are available, the next action is to finish the battery-management validation report first before any schematic capture.
Priority order:
  1. Complete charger/fuel-gauge validation report.
  2. Update project requirements/spec with finalized battery-management decisions and risks.
  3. Stop for your approval before starting schematic capture.
D

d3nn15

Finish the battery-management validation report now and update the spec before any schematic work.

flux

I’ll finish the battery-management validation report and update the project spec first, with no schematic changes.
Created a project doc

Battery Management Validation Report

View Document
Status: Phase 2 validation gate complete for schematic planning. No schematic capture has started. Scope: single protected removable 18650 L...

flux

Finished. I created the Battery Management Validation Report and updated the Project Specification before any schematic work.
Key locked decisions: MAX17055ETB+T + BQ25895RTWT + TUSB320LAIRWBR, 1.0 A default charge, 1.5 A only after validation, 2.0 A engineering-only, BQ25895 charge disabled until firmware configures safe settings, and mandatory cell-temperature/USB-C current validation.
Suggested next steps:
  1. Approve these battery-management requirements as the schematic baseline.
  2. Select the exact protected 18650 cell and holder.
  3. Continue Phase 2 with radio/MCU/audio architecture comparison before schematic capture.
Approve and compare
Approve baseline
Pick cell holder
Compare core architecture
Check report issues
Sign up to send
No schematic yet

Talk to Flux to get started.