# Bluetooth board for iPod classic 5th gen ## Description I am trying to design a simpler solution to integrating a Bluetooth board into an iPod classic 5th gen model. Since current aftermarket mods that add Bluetooth require micro-soldering several thin wires to the iPod board, creating a central board that offers enough room to solder flex cables, reminiscent of modern game console mods, is a cleaner and better solution for the future. This project aims at creating the central Bluetooth board for this purpose, the flex cables will be designed and measured out at a later date. ## Project Details - **Owner:** curioustwin - **Created:** 1/2/2024 - **Last Updated:** 1/2/2024 - **Visibility:** Public ## Key Components ### LED1 — [LTST-C19HE1WT](https://www.flux.ai/vasy_skral/ltst-c19he1wt.md) - Datasheet URL: https://optoelectronics.liteon.com/upload/download/DS22-2008-0044/LTST-C19HE1WT.pdf - Part Type: LED - Manufacturer Part Number: LTST-C19HE1WT - Manufacturer Name: Lite-On Inc. **Pins:** - A - B - G - R ### SW1 — [SWITCH-PUSH-6mm-H8.5mm-4pin](https://www.flux.ai/vasy_skral/switch-push-6mm-h85mm-4pin.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Switch **Pins:** - 1-1 [pin 1-1] - 1-2 [pin 1-2] - 2-1 [pin 2-1] - 2-2 [pin 2-2] ### U1 — [BLUETOOTH HC-06](https://www.flux.ai/jecstronic/bluetooth-hc-06.md) - Datasheet URL: https://www.snapeda.com/parts/BLUETOOTH-SERIAL-HC-06/Olimex/datasheet/ - Manufacturer Part Number: BLUETOOTH-SERIAL-HC-06 - Manufacturer Name: Olimex - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Module **Pins:** - ~CSB [pin 16] - ~CTS [pin 3] - ~RESET [pin 11] - ~RTS [pin 4] - 3V3 [pin 12] - AIO0 [pin 9] - AIO1 [pin 10] - CLK [pin 19] - GND [pin 21] - GND [pin 22] - GND [pin 13] - MISO [pin 18] - MOSI [pin 17] - PCM_CLK [pin 5] - PCM_IN [pin 7] - PCM_OUT [pin 6] - PCM_SYNC [pin 8] - PIO0 [pin 23] - PIO1 [pin 24] - PIO10 [pin 33] - PIO11 [pin 34] - PIO2 [pin 25] - PIO3 [pin 26] - PIO4 [pin 27] - PIO5 [pin 28] - PIO6 [pin 29] - PIO7 [pin 30] - PIO8 [pin 31] - PIO9 [pin 32] - RX [pin 2] - TX [pin 1] - USB_D- [pin 15] - USB_D+ [pin 20] ### U2 — [AP2112K-3.3TRG1](https://www.flux.ai/vasyl/ap2112k-33trg1.md) - Manufacturer Part Number: AP2112K-3.3TRG1 - Datasheet URL: https://www.diodes.com/assets/Datasheets/AP2112.pdf - Manufacturer Name: Diodes Incorporated - Part Type: Integrated Circuit **Pins:** - EN [pin 3] - GND [pin 2] - VIN [pin 1] - VOUT [pin 5] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/curioustwin/bluetooth-board-for-ipod-classic-5th-gen](https://www.flux.ai/curioustwin/bluetooth-board-for-ipod-classic-5th-gen).* --- *Generated from [https://www.flux.ai/curioustwin/bluetooth-board-for-ipod-classic-5th-gen](https://www.flux.ai/curioustwin/bluetooth-board-for-ipod-classic-5th-gen)*