PCB and Enclosure Design

C

controlzeti

Briefly describe what it's like to design a complete product in Flux. Help me understand what the PCB-first and enclosure-first design workflows are like to work with.

flux

Designing a complete product in Flux is an iterative, integrated process: requirements → electronics → PCB layout → enclosure → firmware/bring-up → manufacturing checks. The board and enclosure remain in one project, so connector access, mounting, clearances, and assembly can be checked as the design evolves.
  • PCB-first: Best when electrical architecture, interfaces, signal integrity, or compact routing dominate. You build and verify the schematic, place and route the PCB, then design the enclosure around the actual board geometry. It is efficient for dev boards and technical instruments, but the final industrial design is constrained by PCB decisions.
  • Enclosure-first: Best when size, ergonomics, controls, ports, appearance, or mounting dominate. You establish the product envelope and mechanical features first, then shape and place the PCB to fit them. It usually produces a more intentional product, but requires tighter mechanical/electrical iteration.
In both workflows, Flux can help create and verify the schematic, PCB, parametric enclosure, documentation, and manufacturing outputs. No project changes were made in this session. Execution stopped because your ACUs ran out.

Waiting for input

Sign up to send

Files

Schematic

Layout

3D View

Schematic of ESP32 x86 PC | Advanced [Example]
ESP1
IC1
D2
C8
Capacitance
10uF
C6
Capacitance
0.1uF
C7
Capacitance
0.1uF
C2
Capacitance
0.1uF
C1
Capacitance
0.1uF
Flux Logo2
R1
Resistance
10kΩ
R10
Resistance
430 Ω
Flux Logo1
R9
Resistance
820 Ω
R2
Resistance
5.1kΩ
R4
Resistance
1kΩ
Q1
R8
Resistance
430 Ω
R3
Resistance
5.1kΩ
R5
Resistance
820 Ω
R6
Resistance
430 Ω
R7
Resistance
820 Ω
Q2
PWR

ESP32 x86 PC | Advanced [Example]