DOGS Placement Eval Run

Thought for 2 sec

The placement pass is complete: all 130 parts are inside the board with no reported overlaps, bounds, keepout, edge, or switching-stage findings. I’m independently checking the result and final design-review status before closing.

Thought for 5 mins 3 sec

Thought for 20 sec

Awaiting 1 task

"PCB Placement Review" completed.

Thought for 21 sec

flux

Independent review found three local bypass/bootstrap refinements: C28 at U2 and C22/C38 at U6. The edge connectors are correctly aligned to the board edge and intentionally overhang mechanically; I’m applying those three fixes and re-running explicit placement checks.

Thought for 9 mins 7 sec

Thought for 9 sec

Thought for 7 sec

Awaiting 1 background task

"PCB Placement Complete" completed.

Worked for 1 min 10 sec

flux

All 130 components are placed on the 100 × 100 mm board. U2/U3/U5/U6 power stages are compact, including corrected placement of bootstrap/bypass capacitors C28, C22, and C38.

Open items

182 airwires remain, as expected before routing.
Edge connectors intentionally overhang the outline while their edge rules remain aligned.

Suggested next steps

Configure power-net widths and copper zones.
Route the switching stages first.
Route remaining signals and run full DRC.
Clean up silkscreen and test-point labels.

Files

Schematic

Layout

3D View

Placement Refresh Review

Final corrective pass — 2026-09-15, current result

This section supersedes the historical radius and missing-reference statements below. Geometry has been corrected; visual silkscreen signoff is still blocked. No component, connector, pad, net, BOM value, footprint, trace or stackup was changed in this corrective pass.

Table

Requested item	Status	Evidence / specific blocker
1. Enable actual 1 mm corner radii	Completed	Explicitly set Layout cornerRadius to `1mm` with `disabled:false`. Readback retains 50 × 60 mm and four layers. Baked outline is a rounded rectangle with tangent points (±24,±30)/(±25,±29), establishing 1 mm arcs on all four corners.
2. Restore eighteen missing references	Completed as physical vector geometry; visual acceptance open	All eighteen are now included in the Top silk asset, alongside the other 92 references. See positions below. R8 uses a leader because its immediate corridor cannot accommodate a full-height label.
3. Replace malformed annotations	Completed replacement; failed to obtain final visible signoff	Disabled superseded board-level native text and replaced it with one supported SVG-backed Top Line primitive, containing actual centerline glyph paths rather than font-dependent strings. 126 annotations total: 110 component references (connector references include functions) plus 16 legends. Layout raster still has broken diagnostic text and white-on-white silk; it is not a usable visual proof.
4. Preserve edge connector mating overhang	Completed	No parts moved. J2 remains (-18,-25.9), J5 (19,22), J6 (19,-18) mm. Fresh edge-placement check reports no finding.
5. Rerun requested checks	Completed	Fresh review at 2026-09-15T01:29:20.235Z: zero errors; six switching-stage advisories listed below.
Routing, electrical modification, footprint repair	Unattempted intentionally	Outside corrective scope. Overall board/manufacturing completion is not claimed.

Vector silk implementation

corrected-top-silkscreen-264fb75f-2dfc-4bb9-a46a-7a4e7586d80f

Corrected Top silkscreen source is referenced by Corrected Top Silk - 110 references and 16 legends, a Top-side Line at (-25,+30) mm, with unit scale and 0.15 mm stroke. SVG viewport is 50 × 60 mm; file coordinates map x+25, 30-y. Glyph centerlines are 0.85 mm high with 0.15 mm strokes, giving approximately 1 mm overall height. Rotations are 0°/90°. No `

Final corrective pass — 2026-09-15, current result
Vector silk implementation
Previously missing reference positions
Exact remaining selected-check advisories
Visible-legibility answer and handoff
Historical placement and labeling record (superseded where noted above)
Current disposition — 2026-09-15
Assigned-scope status
Edge anchors and access
Mechanical items not fully verified
Exact remaining placement advisories
Silkscreen work and limits
Read-only verification and handoff
Added scope — functional silkscreen and identity, 2026-09-15
Added-scope status
Exact placed legends
Electrical evidence and intentional omissions
Verification limits and next handoff