Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll inspect the part metadata, schematic symbol, footprint, and existing properties, then look up the official datasheet if needed and update the Datasheet field before cross-checking pins and specs.
Datasheet URL was already set and appears valid; no update was needed.
Symbol pinout matches the datasheet.
Flagged issues: voltage typo in description, PLCC4 ambiguity vs SMD-6P, unspecified pin types, and pad geometry could not be numerically verified from the available layout output.
Suggested next steps:
Fix the description/package wording.
Add clearer pin descriptions/types for NC, GND, DIN, DOUT, and VDD pins.
If you have the exact recommended land pattern image/table, I can do a stricter footprint-dimension check.
The existing Datasheet URL points to a TME-hosted OPSCO datasheet for the SK6812MINIRGBW-XX-P6-A-000 family. The datasheet query tool could not download the TME PDF due to a network error, so I cross-checked via web search results and the matching LCSC-hosted datasheet copy for the same OPSCO family/product code.
Product page dimensions: approximately 3.5 × 3.7 × 1.9 mm.
Recommended footprint uses the same top-view pin ordering as the schematic: left side pins 1/2/3 and right side pins 6/5/4.
Limitation: the layout inspection output exposed pad node names but not all pad geometry dimensions, so I could verify pad count, pad naming, general package outline, and orientation, but not numerically confirm each copper pad dimension against the recommended land pattern.
Key specs from datasheet/search cross-check
Device type: programmable/addressable RGBW LED with integrated controller.
Color variant: NW / natural white, 3800–4200 K.
Supply voltage: 3.7–5.5 V.
Package: SMD-6P, 3535 / approximately 3.5 × 3.7 × 1.9 mm.
Data rate: 800 kbps class one-wire protocol.
PWM frequency: approximately 4 kHz.
Data format: 32-bit RGBW, MSB first, GRBW byte order.
Reset low time: >200 µs.
Typical channel current values found: RGB channels about 8 mA each, white channel about 16.5 mA.
Mismatches / issues flagged
Project description voltage typo: description says 3.75.5VDC; this should be 3.7–5.5 VDC.
Package naming ambiguity: description says PLCC4, but the part and footprint are six-pad / SMD-6P. The package should be described as SMD-6P / 3535 rather than PLCC4 unless retained only as a broad LED package family label.
Pin Type fields are all Unspecified: pin functions are clear from terminal names, but metadata would be cleaner if set to: NC = Passive/Unspecified or NC, GND/VDD = Power, DIN = Input, DOUT = Output.
Duplicate VDD terminal naming is acceptable: VDD_1 and VDD_2 correctly map to pins 4 and 6, but their pin descriptions should explicitly say VDD to avoid BOM/library ambiguity.
Pad geometry not fully exposed in inspection output: no definitive mismatch found, but exact land-pattern dimensions were not numerically verifiable from the available layout readout.