Part Data Review and Update

flux

I reviewed the part against the official Same Sky datasheet and used the datasheet as the source of truth for pin/count validation, which is the right way to audit a part project like this . I also added the missing Datasheet URL project property and set it to the official PDF: https://www.sameskydevices.com/product/resource/tb006-508.pdf
Summary Part audit results

Table

CategoryCurrent projectDatasheet / official sourceStatus
MPNTB006-508-02BETB006-508-02BEMatch
ManufacturerNot present as project propertySame SkyMissing property
Part TypeNot present as project propertyTerminal block / ConnectorMissing property
Datasheet URLMissing before reviewOfficial Same Sky PDF found and addedFixed
Designator PrefixJJ is appropriate for connectorMatch
Package / footprint identityFootprint asset: CUI_TB006-508-02BE.kicad_mod2-position, 5.08 mm pitch horizontal TH terminal blockLooks consistent
Pin count2 terminals in schematic2 poles / 2 contactsMatch
DescriptionProject description says 2-position wire-to-board terminal block, horizontal, 5.08 mm, through-holeSame general descriptionMatch
Key specs from the datasheet

Table

SpecValue
SeriesTB006-508
Exact partTB006-508-02BE
ManufacturerSame Sky
TypeScrew terminal block, horizontal with board
Positions2
Pitch5.08 mm
MountingThrough-hole
Wire gauge26 to 14 AWG
Current rating12 A UL, 15 A IEC
Voltage rating300 V UL, 250 V IEC
Operating temperature-40 to 105 °C
Withstanding voltage2000 Vac
Surge voltage4000 V
Contact resistance20 mΩ
Insulation resistance500 MΩ at 500 Vdc
FlammabilityUL94V-0
Color codeBE = blue
2-position body length10.16 mm
Symbol cross-check Existing terminals

Table

TerminalPin NumberPin TypePin DescriptionDatasheet check
P11PassiveMissingOkay electrically, description missing
P22PassiveMissingOkay electrically, description missing
Symbol findings
  • The project has exactly 2 terminal components, which matches the datasheet’s 2-pole part definition. Exact pin-count matching is a critical check for part projects .
  • Pin numbers 1 and 2 are present and consistent with a 2-contact connector.
  • Both pins are set to Passive, which is appropriate for a simple terminal block.
  • I did not find any Pin Description property on either P1 or P2. That is not a hard mismatch, but it is incomplete metadata.
Footprint cross-check
  • The default footprint contains 2 pads, matching the 2-position part.
  • The footprint asset name CUI_TB006-508-02BE.kicad_mod is consistent with the exact MPN.
  • The project also has a TB006-508-02BE.step 3D model attached, which supports footprint/mechanical consistency.
  • The searchable layout data does not expose exact drill diameter or pad coordinates, so I could not numerically verify hole size from the indexed layout alone.
  • Based on available project data plus the datasheet, the footprint appears consistent with:
    • Through-hole
    • 2 pads
    • 5.08 mm pitch
    • 10.16 mm overall length for the 2-position version
Mismatches / gaps flagged

Table

ItemIssue
Datasheet URLWas missing; now fixed
Manufacturer Name propertyMissing
Part Type propertyMissing
Package or Case Code propertyMissing
Pin descriptionsMissing on P1 and P2
Footprint dimensional verificationNo explicit indexed pad/drill geometry available, so exact drill/pad-size verification remains unconfirmed
Bottom line
  • No hard symbol or pin-count mismatch found
  • No obvious footprint mismatch found
  • The part is mostly structurally correct, but its metadata is incomplete
If you want, I can do the next cleanup pass and add the missing project properties:
  • Manufacturer Name = Same Sky
  • Part Type = Connector
  • Package or Case Code = TB006-508-02BE or a more package-style mechanical label if you prefer
  • Max Current = 15 A or 12 A depending on whether you want IEC or UL represented
  • Operating Temperature = -40°C to +105°C
And I can add short pin descriptions to P1 and P2.
Add missing properties
Fill pin descriptions
Tighten footprint check

Set Datasheet URL to "https://www.sameskydevices.co..."

Set Datasheet URL to "https://www.sameskydevices.com/product/resource/tb006-508.pdf"

Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    image3.png

    image3.png

    image3Thumbnail
    step

    TB006-508-02BE

    TB006-508-02BE.step3D Model
    kicad_mod

    TB006-508-02BE

    CUI_TB006-508-02BE.kicad_modFootprint
    TB006-508-02BE

    TB006-508-02BE

    TB006-508-02BE Symbol.svgDefault

    DB127V-5.08-2P-GN-S

    DB127V-5.08-2P-GN-S thumbnail
    Through Hole,P=5.08mm 2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole 2-pin 5.08mm terminal block borner

    Properties

    DB127V-5.08-2P-GN-S

    DORABO

    Connector

    lcsc.com/datasheet/C3018698.pdf?spm=wm.sxq.inf.ggs&lcsc_vid=ElhbUlFSRlUNBF0CQlQIBQBUFFILBFEAQVVWUgZWE1gxVlNRQVVdVFRSQ1daVDsOAxUeFF5JWBYZEEoBGA4JCwFIFA4DSA%3D%3D

    J

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls