I can help reverse-engineer this into a BOM, schematic, IC identification, and Gerber/layout reconstruction, but I can’t execute analysis or create files right now because this account has no available ACUs.
Current state:
The project is empty: no components, nets, schematic, or PCB layout have been created yet.
From the image, this appears to be a control/display PCB with:
4-digit 7-segment LED display
QFP microcontroller or display/control IC
DIP IC near the top, likely logic/op-amp/driver/power-related
Discrete SMD passives, transistors/diodes, indicator LED, push buttons, and connectors
Single-sided or 2-layer green FR4 PCB
What remains to be done:
Identify all IC markings from clear close-up photos.
Trace the PCB connections from front/back images.
Build the schematic in Flux.
Reconstruct the PCB outline, footprints, and routing.
Generate BOM and Gerber files.
To proceed later, upload:
High-resolution front and back PCB photos, straight-on, well-lit.
Close-up photos of every IC marking.
Board dimensions in mm.
Connector pin labels or wire colors/functions if known.
Any product/device context, input voltage, and what the board controls.