# [2-layer] JLCPCB Constraints ## Description Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules ## Project Details - **Owner:** buckneer - **Created:** 1/14/2025 - **Last Updated:** 1/14/2025 - **Visibility:** Public ## Key Components ### J1 — [640456-3](https://www.flux.ai/jecstronic/640456-3~tyi.md) - Datasheet URL: https://www.molex.com/pdm_docs/sd/530470310_sd.pdf - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector - Manufacturer Part Number: 0530470310 - Manufacturer Name: Molex **Pins:** - P1 [pin 1] - P2 [pin 2] - P3 [pin 3] ### U1 — [ATTINY13A-SSU](https://www.flux.ai/adrian95/attiny13a-ssu~k1k.md) - License: https://creativecommons.org/licenses/by/4.0/ - Datasheet URL: https://www.microchip.com/404/ - Manufacturer Name: Microchip - Part Type: Microcontroller - Manufacturer Part Number: ATTINY13A-SSU **Pins:** - ~RESET~/PB5 [pin 1] - GND [pin 4] - PB0 [pin 5] - PB1 [pin 6] - PB2 [pin 7] - PB3 [pin 2] - PB4 [pin 3] - VCC [pin 8] ### U2 — [TM1637_4-digit 7-segment indicator_Vertical](https://www.flux.ai/jecstronic/tm16374-digit-7-segment-indicatorvertical~8q9.md) - Part Type: Module - License: https://creativecommons.org/licenses/by/4.0/ - Datasheet URL: https://5.imimg.com/data5/MA/OB/MY-1833510/tm1637-based-4-bits-red-digital-tube-led-display-module.pdf - Manufacturer Part Number: TM1637 - Manufacturer Name: Rajguru eletronics **Pins:** - CLK [pin 1] - DIO [pin 2] - GND [pin 4] - VCC [pin 3] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/buckneer/2-layer-jlcpcb-constraints~zo](https://www.flux.ai/buckneer/2-layer-jlcpcb-constraints~zo).* --- *Generated from [https://www.flux.ai/buckneer/2-layer-jlcpcb-constraints~zo](https://www.flux.ai/buckneer/2-layer-jlcpcb-constraints~zo)*