Rotate Components 90 Degrees

rotate a further 90deg clockwise, but using rewrite_layout_rules tool instead

Worked for 35 sec

Done — I rotated R1, C1, and C2 a further 90° clockwise using rewrite_layout_rules, setting their rotationZ to 180°. DRC still only reports the existing 3 airwires; no overlapping-copper or dangling-trace issues were reported.

Thought

flux

Set R1's rotationZ to "180deg"
Set C1's rotationZ to "180deg"
Set C2's rotationZ to "180deg"

B

bryan

remove all rotation from all components

Worked for 20 sec

flux

Removed all explicit rotation rules from all 3 PCB components: R1, C1, and C2.

Run DRC check

Re-place components

Inspect R1 layout

Export STEP model

Thought

flux

Removed R1's rotation layout rule
Removed R1's rotationZ layout rule
Removed R1's rotationX layout rule
Removed R1's rotationY layout rule
Removed C1's rotation layout rule
Removed C1's rotationZ layout rule
Removed C1's rotationX layout rule
Removed C1's rotationY layout rule
Removed C2's rotation layout rule
Removed C2's rotationZ layout rule
Removed C2's rotationX layout rule
Removed C2's rotationY layout rule

Sign up to send

Files

Schematic

Layout

3D View

R1

P1

C1

C2

Querulous Brown Lightcycle