Rotate Components 90 Degrees
Worked for 35 sec
Done — I rotated R1, C1, and C2 a further 90° clockwise using
rewrite_layout_rules, setting their rotationZ to 180°. DRC still only reports the existing 3 airwires; no overlapping-copper or dangling-trace issues were reported.Thought
- Set R1's rotationZ to "180deg"
- Set C1's rotationZ to "180deg"
- Set C2's rotationZ to "180deg"
Worked for 20 sec
Removed all explicit rotation rules from all 3 PCB components: R1, C1, and C2.
Run DRC check
Re-place components
Inspect R1 layout
Export STEP model
Thought
- Removed R1's rotation layout rule
- Removed R1's rotationZ layout rule
- Removed R1's rotationX layout rule
- Removed R1's rotationY layout rule
- Removed C1's rotation layout rule
- Removed C1's rotationZ layout rule
- Removed C1's rotationX layout rule
- Removed C1's rotationY layout rule
- Removed C2's rotation layout rule
- Removed C2's rotationZ layout rule
- Removed C2's rotationX layout rule
- Removed C2's rotationY layout rule
