Vintage Dictation Mic
Thought for 6 mins 26 sec
Thought for 9 sec
Managing 1 task
Thought for 10 sec
3/3 Independently review corrected prototype package and document remaining release blockers
Fix board manufacturing defects and sourcing — completed; unsupported ERC source declarations remain blocked
Resolve case print warning and assess thickness/microphone fit — completed; physical PTT tolerance qualification remains open
Independently review corrected prototype package and document remaining release blockers
Thought for 21 sec
Awaiting 1 task
"Vintage Mic Review" completed.
Thought for 1 min 5 sec
flux
The review confirms the microphone correction and board spacing fixes, but the files still aren’t cleared for ordering. Three power-source metadata errors can’t be corrected with the available tools, and the button’s safe travel still needs confirmation; I’m recording those blockers clearly.
Thought for 3 mins 32 sec
Thought for 9 sec
Awaiting 1 task
"PCB Manufacturing Package" completed.
Worked
flux
I fixed the board spacing, connector holes, missing part numbers and microphone pin mapping; all six case files also pass a slicer check—but don’t order yet.
Remaining blockers:
- Three electrical-check errors need a power-source metadata correction the available tools couldn’t apply.
- The button’s safe switch travel needs confirmation.
- Part availability and manufacturer approval are still pending.
The findings are in the Independent Review Summary; the next step is Flux support for the editing limitation, followed by switch and manufacturer checks before spending money.
