Project Start Help
Thought for 7 sec
The five-sided outline and placement executor has completed, but I can’t inspect or reconcile its report because no ACUs remain.
Remaining work:
- Confirm outline, five M3 holes, 4-layer stackup, placement, and antenna keepout
- Complete routing and copper planes
- Run and clear DRC
- Export BOM, Gerbers/drill, and pick-and-place files
Thought for 5 sec
I’ll read the latest instructions, compare them with the actual placed PCB, and continue the remaining layout work automatically.
Thought for 15 mins 17 sec
Thought for 6 sec
Referenced guidance.
1/2 Route all remaining PCB nets and copper per locked routing constraints
Thought for 11 sec
Thought for 6 sec
Awaiting 1 background task
Received notification from "PCB Routing Completion" that it finished — picking the work back up.
Thought for 6 sec
The routing executor completed, but I can’t inspect or reconcile its report because no ACUs remain. The board may contain applied routing changes, but zero airwires and clean DRC are not yet confirmed.
Remaining work:
- Read the executor’s final routing report
- Run fresh airwire and DRC checks
- Apply any final routing repairs
- Finish with either “DRC clean” or the exact unresolved violations, one per line
Check routing results
Prepare manufacturing exports
