MIPI CSI-2 Camera Board Design

Thought for 12 sec
Analyzing in depth.
B

bkummert

Yes, please continue with PCB placement and auto-layout.
Place the M12 lens hole (12.5mm) centered 10mm from the top edge.
Place CN1 at the bottom edge, centered.
Place the IMX335 sensor directly under the lens hole.
Then run auto-layout for the remaining components.
B

bkummert

Yes, please continue with PCB placement and auto-layout.
Place the M12 lens hole (12.5mm) centered 10mm from the top edge.
Place CN1 at the bottom edge, centered.
Place the IMX335 sensor directly under the lens hole.
Then run auto-layout for the remaining components.
B

bkummert

Yes, please continue with PCB placement and auto-layout.
Place the M12 lens hole (12.5mm) centered 10mm from the top edge.
Place CN1 at the bottom edge, centered.
Place the IMX335 sensor directly under the lens hole.
Then run auto-layout for the remaining components.
Sign up to send

Files

Pins

Symbol

Layout

3D View

IMX335 CSI-2 Camera Module

IMX335 CSI-2 Camera Module thumbnail