WiFi & Bluetooth Sensor Node


Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.
It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.
I’ll build the schematic for a USB-C powered Wi‑Fi/BLE temperature/humidity sensor node: set requirements, choose parts, add/wire power protection, MCU, sensor, and then run checks.
Created a project doc

Project Specification — USB-C WiFi BLE TH Sensor

View Document

Status: Draft schematic in progress. A consumer USB-C powered temperature and relative humidity sensor node with Wi-Fi and Bluetooth Low Ene...
Architecture review agrees with a USB-C sink plus real VBUS protection and a buck regulator; I’m selecting a low-power certified Wi‑Fi/BLE module rather than a hot LDO-based ESP32-style power tree.

Demo Complete

The guided demo is finished. You watched Flux replay a real design session in this read-only project. Sign up to build your own project.

No schematic yet

Talk to Flux to get started.