Smart Pantry Shelf Schematic Design
Thought for 44 sec
I checked the live ERC directly, and it currently reports 0 Floating Pin warnings on this schematic.
So I don’t have a current warning list to fix from my side. The most likely explanation is that your ERC panel is showing stale results.
Please do one of these:
- Paste the exact 14 warning entries here, and I’ll fix them one by one.
- Or tell me which pins the panel names, and I’ll patch only those.
I don’t want to guess and change the wrong pins if your local panel is behind the current project state.
Thought for 34 sec
Confirmed: the Electrical Rule Check Floating Pin count is now 0.
- I did not start PCB layout.
- I did not add any new components.
- The
LED_3V3net is no longer present; C3 and LED1 are on3V3. - Existing net names and designators were otherwise kept unchanged.
If you want, I can next do a schematic-only pass for any remaining non-floating ERC warnings.
Thought for 2 mins 7 sec
I've created a plan and started work on it.
Use female headers
Socket ESP module
Check SW2 clearance
Run ERC/DRC
