Dry Contact Inputs Design
Thought for 1 min 53 sec
I will place a 1x9 header named DRY_CONTACT_INPUTS and wire it via portals as requested.
- Add Pin Header 01x09 2.54mm Vertical and set label to DRY_CONTACT_INPUTS.
- Create portals IN1..IN8 (using Net Portal); use existing Ground net.
- Connect pins: 1→GND; 2→IN1; 3→IN2; 4→IN3; 5→IN4; 6→IN5; 7→IN6; 8→IN7; 9→IN8.
Click Start on the plan bar to execute. Let me know if you want right-angle instead.
Thought for 2 mins 56 sec
Here’s a right-angle 1x9, 2.54 mm pitch, through-hole header suitable for DRY_CONTACT_INPUTS, plus close alternatives.
Exact match (recommended)
| Right-angle 1x9 2.54 mm THT Headers |
|---|---|---|---|---|
| Pin Header 01x09 2.54mm Horizontal | 068b7f9d-2e3d-c0d2-55f3-ab9503839942 | — | — | Through Hole |
Close alternatives
| Alternatives (verify pitch/pin count) |
|---|---|---|---|---|
| 440053-9 | e2ef8305-a410-47ed-850d-44450428905e | 440053-9 | — | Right-angle, 9-pos, 2.50 mm pitch (not 2.54 mm) |
| 61301221021 | aee69d14-645a-46be-a330-c422ddc78b04 | 61301221021 | — | Right-angle, 12-pos, 2.54 mm pitch (can cut/use 9) |
| 1821326 | bd9deb7b-8190-4b00-9e0e-31e5790d929a | 1821326 | — | Right-angle, terminal-count varies; 2.54 mm pitch listed |
Recommendation:
- Use Pin Header 01x09 2.54mm Horizontal for an exact 1x9, 2.54 mm, right-angle THT footprint.
