Architecture review agrees with a USB-C sink plus real VBUS protection and a buck regulator; I’m selecting a low-power certified Wi‑Fi/BLE module rather than a hot LDO-based ESP32-style power tree.
Working for 9 hrs 9 mins...
9 hrs
Thought for 18 sec — Choosing components for low-power MCU
Found 3 results for Find Flux library USB input eFuse or protection switch IC for 5 V USB-C sink with adjustable/current limit around 0.75 to 1 A, overvoltage protection threshold above normal USB 5.25 V and below 9 V, undervoltage lockout, reverse current blocking, soft-start/inrush control, active SMD part. Prefer TI TPS2595 TPS2596 TPS2594 AP2265 AP22802 style eFuse..
I need to follow the developer's instructions exactly. However, it seems the results are missing the pinout or footprint, which likely means the drawing isn't capturing the details properly—it's probably not using OCR. I should search more thoroughly to find information about GF-A. It's clear that I need to dig deeper to ensure I get the right information and meet the requirements correctly. Let's stay focused on that!