USB-C Sensor Node

Worked for 57 sec
Thought for 18 sec — Choosing components for low-power MCU
Found 3 results for Find Flux library USB input eFuse or protection switch IC for 5 V USB-C sink with adjustable/current limit around 0.75 to 1 A, overvoltage protection threshold above normal USB 5.25 V and below 9 V, undervoltage lockout, reverse current blocking, soft-start/inrush control, active SMD part. Prefer TI TPS2595 TPS2596 TPS2594 AP2265 AP22802 style eFuse..
Found 10 results for TPS2595.
Found 10 results for TPS2596.
Found 2 results for AP22652.
Found 4 results for NCP361.
Thought for 19 sec
Thought for 16 sec
Reading SIWG917Y111MGABAR, SHT41-AD1B-R2, USB4105-GF-A, TPS259621DDAR, MP28301GG-Z, USBLC6-2SC6, ESD5341N datasheets.
Thought for a moment

flux

No project changes were made; the schematic is still empty (0 components, 0 nets). I’m currently unable to open the attachment or continue building because no ACUs are available.
Remaining work:
  • Review the attached requirements.
  • Select the Wi‑Fi/BLE module, digital T/RH sensor, USB‑C receptacle, protected 5 V power path, and 3.3 V regulator.
  • Capture and wire the schematic.
  • Verify USB‑C current assumptions, OVP/UVLO/OCP behavior, peak radio-current margins, and ERC.
Request needed details
Sign up to send
No schematic yet

Talk to Flux to get started.