Project Startup
Thought for 8 sec
I’ll build the complete schematic in functional blocks, then run connectivity and electrical-consistency checks. Unknown motor current and GPS breakout voltage will remain explicit verification items.
Worked for 16 mins 28 sec
Created a thread
CubeSat ADCS Schematic
Needs input
View Thread
Created the ESP32 CubeSat ADCS Test Platform project name and description, and started the complete schematic build.
Open items:
- The build could not be completed or verified because no ACUs are currently available.
- Controller, sensors, GPS, power rails, motor drivers, potentiometers, DIP inputs, and ERC review remain unconfirmed.
- No PCB layout was started.
Once ACUs are available, resume the schematic build and complete the electrical-consistency/ERC checks.
Received notification from "CubeSat ADCS Schematic" that it finished — picking the work back up.
Thought for 2 sec
The executor reports the CubeSat ADCS schematic build completed, but I cannot inspect or independently verify its changes because no ACUs are currently available.
Remaining work:
- Reconcile the schematic against the full requirements.
- Run ERC/connectivity checks and resolve violations.
- Confirm motor stall current is within the DRV8838 limits.
- Confirm the GPS module supply and logic-voltage requirements.
- Review pin assignments, power rails, and all three motor channels before starting PCB layout.
Review completed schematic
Check electrical issues
Verify motors and GPS
Prepare layout readiness
Waiting for input
