USB-C Sensor Node

Worked for 35 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget

Rename project, create specification, and record initial requirements/power budget

Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Add main components and supporting passives to the schematic

Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators

Create firmware/regulatory/bring-up project files

Run schematic/design checks and fix actionable issues

Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for a moment
Creating documentation and estimates
I

flux

No design changes have been made yet; the project remains empty with 0 components and 0 nets. I also couldn’t inspect the attached requirements file because no ACUs are currently available.
Remaining work: review the attachment, finalize architecture and component selection, capture the USB‑C/protected 5 V input and 3.3 V supply, add the Wi‑Fi/BLE MCU and digital T/RH sensor, then run ERC and document layout/antenna constraints.
Extract design requirements
Brainstorm architecture
Create project specification

Waiting for input

Sign up to send
No schematic yet

Talk to Flux to get started.

No layout yet

When components get added to the schematic, they'll show up here.