USB-C Sensor Node
Worked for 35 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for a moment
Creating documentation and estimates
I
Thought for 3 sec
No design changes have been made yet; the project remains empty with 0 components and 0 nets. I also couldn’t inspect the attached requirements file because no ACUs are currently available.
Remaining work: review the attachment, finalize architecture and component selection, capture the USB‑C/protected 5 V input and 3.3 V supply, add the Wi‑Fi/BLE MCU and digital T/RH sensor, then run ERC and document layout/antenna constraints.
Extract design requirements
Brainstorm architecture
Create project specification
No schematic yet
Talk to Flux to get started.