BOM data fix J1 MPN
BOM data fix only, no layout or schematic changes.
J1 (5 V input, Molex Nano-Fit 2 pin): the footprint is
1053131202 (gold) and that is the part we buy. The Manufacturer Part Number property of J1 still reads 1053131102 (tin). Set the MPN of J1 to 1053131202, manufacturer Molex, and make any related part description text say gold contacts. Do not move, re-route or replace anything else.Then confirm the new BOM line for J1 and that DRC/ERC results are unchanged.
Thought for 15 sec
I’ll capture the current BOM and DRC/ERC state, update only J1’s metadata, then re-run both checks to confirm there is no design delta.
Worked for 1 min 7 sec
J1’s purchasing metadata is corrected in place. I’m now verifying the generated BOM line and comparing fresh DRC/ERC results against the pre-change counts.
Worked for 1 min 8 sec
Updated J1 BOM metadata only:
- MPN:
1053131202 - Manufacturer: Molex
- Description/type: Wire-to-board / wire-to-wire connector, gold contacts
- Footprint:
CONN-TH_2P-P2.50_MOLEX_1053131202 - Quantity: 1
No component replacement, connectivity, schematic geometry, routing, placement, or layout changes were made.
Fresh checks confirm results are unchanged: DRC remains at 18 errors and 35 warnings; ERC has no reported findings.
