Schematic for ESP32-S3-WROOM-1 Reference Design aLf8: Compact...

ESP32S3 Schematic Design

0:12

General (prev)

I will add a TP4056-based LiPo charging module (with onboard protection) and an AP2112 3.3V LDO to the schematic. Reason: the TP4056 module provides USB-powered charging plus battery protection in a compact module ideal for the 45×12mm form factor; the AP2112 is a small, low-dropout 3.3V regulator (SOT-23/SOT-25 family) that gives better headroom and lower quiescent current than AMS1117 for battery operation. I will add them as U8 (TP4056 module) and U9 (AP2112 3.3V LDO).

48 days

Added 3 components

0:12

Added 1x TP4056 Module as U8

Added 1x AP2112K-3.3TRG1 as U9

Added 1x B2B-PH-K-S(LF)(SN) as J5

48 days

Reviewed passive components ratings

4:25

Autopilot

Message

Started: Review all passive components for appropriate voltage and power ratings

48 days

flux

0:08

General (prev)

I set voltage ratings for capacitors and power ratings for resistors across the schematic: 0.1µF decoupling caps → 16 V; bulk 10µF/22µF caps → 10 V; 0603 resistors → 0.1 W. Changes applied to the designators listed in the component-property update instruction.

48 days

Updated properties for 37 objects

0:15

Set C1's Voltage Rating to "16"

Set C2's Voltage Rating to "16"

Set C3's Voltage Rating to "16"

Set C4's Voltage Rating to "10"

Set C5's Voltage Rating to "10"

Set C6's Voltage Rating to "10"

Set C7's Voltage Rating to "16"

Set C8's Voltage Rating to "16"

Set C9's Voltage Rating to "16"

Set R1's Power Rating to "0.1"

Set R2's Power Rating to "0.1"

Set R3's Power Rating to "0.1"

Set R4's Power Rating to "0.1"

Set R5's Power Rating to "0.1"

Set R6's Power Rating to "0.1"

Set R7's Power Rating to "0.1"

Set R8's Power Rating to "0.1"

Set R9's Power Rating to "0.1"

Set R10's Power Rating to "0.1"

Set R11's Power Rating to "0.1"

Set R12's Power Rating to "0.1"

Set R13's Power Rating to "0.1"

Set R14's Power Rating to "0.1"

Set R15's Power Rating to "0.1"

Set R16's Power Rating to "0.1"

Set R17's Power Rating to "0.1"

Set R18's Power Rating to "0.1"

Set R19's Power Rating to "0.1"

Set R20's Power Rating to "0.1"

Set R21's Power Rating to "0.1"

Set R22's Power Rating to "0.1"

Set R23's Power Rating to "0.1"

Set R24's Power Rating to "0.1"

Set R25's Power Rating to "0.1"

Set R26's Power Rating to "0.1"

Set R30's Power Rating to "0.1"

Set R31's Power Rating to "0.1"

48 days

Reviewed active components compatibility

2:43

Autopilot

Started: Review active components for headroom and compatibility and update component properties as needed

48 days

Updated properties for 12 objects

0:13

Set U1's Operating Voltage to "3.3"

Set U2's Operating Voltage to "3.3"

Set U2's Role Details to "Mono I2S DAC/AMP, VDD = 3.3V"

Set U3's Operating Voltage to "3.3"

Set U4's Operating Voltage to "3.3"

Set U6's Output Voltage to "3.3"

Set U6's Operating Voltage to "3.3"

Set U7's Output Voltage to "5"

Set U7's Operating Voltage to "5"

Set U8's Input Voltage to "5"

Set U8's Charge Voltage to "4.2"

Set U8's Role Details to "TP4056 LiPo charger module with onboard protection; USB VBUS input -> BAT output"

Set U9's Output Voltage to "3.3"

Set U9's Operating Voltage to "3.3"

Set U9's Role Details to "3.3V LDO for ESP32-S3 and peripherals; input from BAT/TP4056 output"

Set J2's Voltage to "5"

Set J2's Role Details to "USB-C VBUS and data connector for programming/debug"

Set J5's Role Details to "1S LiPo battery connector (JST PH series)"

Set L1's Current Rating to "1"

Set MK1's Operating Voltage to "3.3"

48 days

Verified all component footprints

1:01

Autopilot

Started: Verify footprints for all components and update generic passive package sizes as needed

48 days

Selected single-sided, standard stackup

1:00

Autopilot

Started: Select a single-sided, standard stackup

48 days

Set board dimensions

0:57

Autopilot

Started: Set the board dimensions to 45 mm × 12 mm

48 days

Configured top copper ground fill

1:16

Autopilot

Started: Configure copper layers (top copper only) and apply ground fill on the top layer

48 days

Defined RF keep-out region

1:05

Autopilot

Started: Define the RF keep-out region or place the u.FL footprint zone

48 days

Set board dimensions to 45×12 mm

1:49

Autopilot

Started: Pause for user review of board size, RF keep-out, and mounting/test-pad strategy

48 days

Updated 1 net

0:10

Disconnected IC1:PGND

48 days

Defined RF keep-out region

1:14

Autopilot

Started: Classify all nets by type and update net properties accordingly

48 days

Setting appropriate trace widths for power nets...

0:37

Autopilot

Started: Set appropriate trace widths for power nets based on peak current requirements

48 days

Setting +5V power net width...

0:41

Autopilot

Started: Set appropriate trace width for the +5V power net based on its peak current requirements

48 days

Worked

0:24

Autopilot

48 days

Stopped due to a problem. Please try again.

I need to break down this circuit diagram into functional blocks. Please analyze...

Capacitance

10u F

Resistance

4.7k Ω

3V3

UART_TXD0

IO48

VL53L0X_IRQ

IO1

R10

Resistance

500 Ω

ESP_EN

TCK

TDO

Capacitance

0.1u F

IO15

Resistance

100k Ω

Resistance

5.1K Ω

3V3

+5V

IO36

IO37

IO0

TCK

IO4

3V3

IO13

+5V

I2C_SCL

IO7

IO9

TDI

TMS

IO21

UART_RXD0

+5V

IO8

IO1

+5V

IO46

LED1

3V3

TDO

IO10

LED2

UART_TXD0

IO3

IO38

Resistance

220 Ω

IO16

Capacitance

10u F

Resistance

220 Ω

Resistance

220 Ω

IO2

VL53L0X_IRQ

UART_RXD0

IO17

USB_D-

TDI

IO4

TMS

3V3

IO3

IO12

Resistance

4.7k Ω

IO36

C7 P1 - U2 VDD_1

IO10

IO15

IO14

IO7

IO6

IO0

3V3

IO13

USB_D-

IO5

3V3

IO14

Resistance

500 Ω

USB_D+

IO47

IO8

IO35

IO21

Capacitance

0.1u F

IO2

IO5

IO45

3V3

IO1

Capacitance

10u F

USB_D+

LED3

I2S_SDOUT1_RESERVE

3V3

IO6

3V3

Reviews

Electrical Rule Checks

Missing Footprints

Reports components that need a footprint but don't have one.

Design Rule Checks

Overlapping Copper • 161

Des	Net	Des	Net
C3:P2	GND	J5:PIN2	None
C6:P2	GND	R31:P1	None
C7:P1	GND	Trace 6e09	Net 48
C7:P2	GND	Trace 6e09	Net 48
IC1:PAD	GND	IC1:8b302e13	None
IC1:PAD	GND	IC1:8b302e13	None
J3:Pin_16	GND	J13:MP2	None
R1:P2	GND	R1:P2	None
R3:P1	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
R10:P2	GND	Trace 22d4	Net 35
R10:P2	GND	U1:IO21	TCA_RESET
R11:P2	GND	Trace ed9c	Net 48
R13:P2	GND	Trace e56f	Net 40
R24:P2	GND	SW2:～3	Net 48
R24:P2	GND	Trace 8e6e	Net 48
R24:P2	GND	Trace 6781	Net 48
R24:P2	GND	Trace ed9c	Net 48
Trace 2dbc	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Trace 2dbc	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace 3ac9	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Trace 3ac9	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace 4f10	GND	IC1:8b302e13	None
Trace 5b38	GND	U1:41_16	None
Trace 5f8b	GND	U2:BCLK	Net 37
Trace 5f8b	GND	U1:41_20	None
Trace 5f8b	GND	U2:GND_3	None
Trace 18f1	GND	IC1:8b302e13	None
Trace 22fc	GND	U1:41_12	None
Trace 52ff	GND	U1:41_11	None
Trace 97f7	GND	J4:P1	None
Trace 142a	GND	IC1:8b302e13	None
Trace 142a	GND	IC1:8b302e13	None
Trace 0274	GND	IC1:8b302e13	None
Trace 693c	GND	IC1:8b302e13	None
Trace 832b	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace 1226	GND	U2:LRCLK	Net 36
Trace 1226	GND	U1:41_21	None
Trace 1226	GND	U2:N.C._4	None
Trace 1509	GND	U1:41_15	None
Trace 1929	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Trace 1929	GND	R1:P2	None
Trace 3112	GND	J4:P1	None
Trace 5377	GND	IC1:8b302e13	None
Trace 6655	GND	IC1:8b302e13	None
Trace 6655	GND	IC1:8b302e13	None
Trace 9510	GND	U1:41_13	None
Trace b82a	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace b390	GND	U1:41_17	None
Trace bdcb	GND	U1:41_14	None
U4:A2	GND	J1:Pin_7	Net 16
U4:A2	GND	Trace 999b	Net 16
U4:VCC	GND	J1:Pin_6	Net 12
Via	GND	J4:P2	None
Via	GND	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Via	GND	R1:P2	None
R1:P1	Net 5	R18:P2	GND
Trace 31d3	Net 5	R18:P2	GND
J3:Pin_10	Net 8	Trace 8f62	Net 48
J1:Pin_2	Net 10	J5:PIN1	None
Trace 805d	Net 10	J5:PIN1	None
Trace 805d	Net 10	J5:PIN2	None
Trace adcb	Net 11	J4:P1	None
Trace adcb	Net 11	J5:PIN2	None
Trace 6590	Net 12	J4:P2	None
J2:DN2	Net 13	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace 3e43	Net 13	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Trace 3e43	Net 13	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace 2132	Net 13	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
J2:DP1	Net 14	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
Trace 4f77	Net 14	R14:P1	None
Trace 5ae9	Net 14	R14:P1	None
Trace 6c86	Net 14	R14:P1	None
Trace 8c45	Net 14	R14:P1	None
Trace d843	Net 14	R14:P1	None
Trace 4a0f	Net 15	J4:P2	None
Trace 1364	Net 17	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Trace be2b	Net 17	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
U3:SDA	Net 19	R11:P2	GND
U3:SDA	Net 19	SW2:～1	Net 48
U3:SDA	Net 19	Trace ed9c	Net 48
Trace 6450	Net 22	U1:IO10	Net 51
U8:BAT-	Net 31	J1:Pin_16	Net 17
U8:P2	Net 31	J1:Pin_16	Net 17
Trace 312f	Net 32	J1:Pin_15	GND
Trace 312f	Net 32	J1:Pin_15	GND
U8:P1	Net 32	J1:Pin_15	GND
Trace 0e13	Net 35	R10:P1	TCA_INT
Trace 64c5	Net 35	U2:～SD_MODE	GND
Trace 64c5	Net 35	U2:GND_1	GND
Trace 64c5	Net 35	U2:N.C._1	None
Trace 64c5	Net 35	U2:N.C._2	None
U2:LRCLK	Net 36	U1:GND	GND
U2:BCLK	Net 37	U1:41_20	None
L1:P1	Net 40	R13:P2	GND
L1:P1	Net 40	R13:P1	None
R2:P2	Net 42	R14:P1	None
Trace 47a6	Net 42	R14:P2	GND
Trace 2141	Net 42	R14:P2	GND
J2:CC1	Net 43	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
R3:P2	Net 43	J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None
Trace 8107	Net 43	J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None
D1:A	Net 44	R14:P2	GND
Trace 0f59	Net 44	R14:P2	GND
Trace 6f14	Net 44	J5, J6, J7, J8, J9, J10, J11, J12:Pin_3	None
Trace 532f	Net 44	R14:P2	GND
Trace b01c	Net 44	R14:P2	GND
Trace cf30	Net 44	R14:P2	GND
U3:GPIO1	Net 46	Trace ed9c	Net 48
Trace ab28	Net 48	J5, J6, J7, J8, J9, J10, J11, J12:Pin_3	None
U4:SDA	Net 49	Trace 999b	Net 16
J1:Pin_11	Net 51	R8:P2	GND
J1:Pin_11	Net 51	Trace fa2f	Net 22
Trace 312f	Net 53	J1:Pin_13	GND
Trace 312f	Net 53	Trace 6216	GND
Trace 312f	Net (R1 - P2)	J1:Pin_14	GND
Trace 312f	Net (R1 - P2)	J1:Pin_14	GND
Trace 312f	Net (R1 - P2)	Trace 6216	GND
Trace 312f	Net (R1 - P2)	Trace 6216	GND
R10:P1	TCA_INT	U1:IO13	Net 33
R10:P1	TCA_INT	U1:IO14	Net 34
Trace 3dee	TCA_SCL	U1:IO9	Net 20
U3:SCL	TCA_SCL	SW2:～1	Net 48
U3:SCL	TCA_SCL	Trace ed9c	Net 48
U4:SCL	TCA_SCL	J1:Pin_7	Net 16
U4:SCL	TCA_SCL	Trace 999b	Net 16
D2:A	None	J1:Pin_10	TCA_SCL
IC1:8b302e13	None	Trace d50b	GND
J4:P1	None	C2:P2	GND
J4:P1	None	Trace d291	GND
J4:P2	None	Trace c3d9	GND
J4:P2	None	Trace d291	GND
J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None	Trace fb08	Net 13
J5, J6, J7, J8, J9, J10, J11, J12:Pin_1	None	Trace fed7	Net 17
J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None	Trace ee28	Net 13
J5, J6, J7, J8, J9, J10, J11, J12:Pin_2	None	Trace fb08	Net 13
J5, J6, J7, J8, J9, J10, J11, J12:Pin_3	None	Trace d66f	Net 44
J5:PIN2	None	C2:P2	GND
R1:P1	None	Trace 31e5	GND
R1:P1	None	Trace abeb	GND
R1:P2	None	Trace 31e5	GND
R1:P2	None	Trace abeb	GND
R1:P2	None	Trace bd15	GND
R17:P1	None	Trace 2dbc	GND
R17:P1	None	Trace 3ac9	GND
R24:P1	None	SW2:～4	GND
R25:P1	None	J2:SHIELD	GND
U2:GND_3	None	U1:GND	GND
U3:8	None	R11:P2	GND
U3:8	None	Trace ed9c	Net 48
U4:SC4	None	J1:Pin_9	Net 49
U4:SC4	None	Trace 4dae	Net 49
U4:SC5	None	J1:Pin_8	Net 18
U4:SC6	None	J1:Pin_8	Net 18
U4:SC6	None	Trace 9266	Net 18
U4:SC7	None	J1:Pin_7	Net 16
U4:SD4	None	J1:Pin_9	Net 49
U4:SD4	None	Trace 4dae	Net 49
U4:SD5	None	Trace 4dae	Net 49
U4:SD6	None	J1:Pin_8	Net 18
U4:SD6	None	Trace 9266	Net 18
U4:SD7	None	Trace 9266	Net 18

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides • 21

	Designator	Ruleset
	＊｀REF｀＊	R5
	＊｀REF｀＊	IC1
	＊｀REF｀＊	C2
	＊｀REF｀＊	J3
	＊｀REF｀＊	R6
	＊｀REF｀＊	J1
	＊｀REF｀＊	R3
	＊｀REF｀＊	C3
	＊｀REF｀＊	C1
	＊｀REF｀＊	SW2
	＊｀REF｀＊	LED1
	＊｀REF｀＊	U1
	＊｀REF｀＊	R2
	＊｀REF｀＊	R4
	＊｀REF｀＊	C5
	＊｀REF｀＊	SW1
	＊｀REF｀＊	LED3
	＊｀REF｀＊	LED2
	＊｀REF｀＊	C4
	＊｀REF｀＊	C6
	＊｀VALUE｀＊	L1 value

Airwires • 34

	Designators	Net
	C6:P2, Trace 5b6f:Trace 5b6f	GND
	C8:P1, C8:P2	GND
	J2:GND__1, R14:P2	GND
	J2:SHIELD__2, R21:P2	GND
	R11:P2, U3:GND	GND
	R12:P2, R8:P2	GND
	R16:P2, R9:P2	GND
	R21:P2, R15:P2	GND
	R26:P2, R24:P2	GND
	SW2:～4, R22:P2	GND
	Trace 9510:Trace 9510, U2:GAIN_SLOT	GND
	U2:～SD_MODE, U2:GND_1	GND
	U2:GAIN_SLOT, U2:GND_1	GND
	U4:A1, U4:A0	GND
	U4:A2, U4:VCC	GND
	U4:GND, R8:P2	GND
	U4:GND, R9:P2	GND
	Via-Island-2:Via-Island-2, R10:P2	GND
	Via-Island-14:Via-Island-14, C8:P1	GND
	U8:GND, U8:P2	Net 31
	Trace 64c5:Trace 64c5, U2:DIN	Net 35
	U2:LRCLK, U1:IO16	Net 36
	U2:BCLK, U1:IO17	Net 37
	Trace 3a5e:Trace 3a5e, Trace f2f0:Trace f2f0	Net 48
	Trace ac3e:Trace ac3e, U4:SDA	Net 49
	J1:Pin_11, U1:IO10	Net 51
	R10:P1, U1:IO36	TCA_INT
	U4:～RESET, R9:P1	TCA_RESET
	U4:～RESET, Trace 0c66:Trace 0c66	TCA_RESET
	U3:SCL, Trace b68e:Trace b68e	TCA_SCL
	U4:SCL, J1:Pin_10	TCA_SCL
	Fill:Fill, U2:VDD_1	None
	Fill:Fill, U4:A1	None
	Fill:Fill, U4:A2	None

Layers with Multiple Fills • 1

	Layer	Net
	All	GND, GND

Floating Copper • 1

	Name
	Trace 5530, Trace fa2f, Trace e7ed, Trace 6450

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 61

	Designator	MPN
	C1	None
	C1	None
	C2	None
	C2	None
	C3	None
	C3	None
	C4	None
	C4	None
	C5	None
	C5	None
	C6	None
	C6	None
	C7	None
	C7	None
	C8	None
	C9	None
	J1	None
	J3	None
	J4	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	J5, J6, J7, J8, J9, J10, J11, J12	None
	L1	None
	LED1	None
	LED2	None
	LED3	None
	R1	None
	R1	None
	R2	None
	R2	None
	R3	None
	R4	None
	R5	None
	R6	None
	R7	None
	R8	None
	R9	None
	R10	None
	R11	None
	R12	None
	R13	None
	R14	None
	R15	None
	R16	None
	R17	None
	R18	None
	R19	None
	R20	None
	R21	None
	R22	None
	R23	None
	R24	None
	R25	None
	R26	None
	R30	None
	R31	None

Parts Available

Beta

Checks that all components are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

ESP32-S3-WROOM-1 Reference Design aLf8

Controls

Properties

System Architecture

System Architecture

License

https://creativecommons.org/licenses/by/4.0/

Availability & Pricing

Distributor		Qty 1
	Arrow	$6.41–$8.76
	Digi-Key	$10.81–$16.94
	LCSC	$12.48–$12.62
	Mouser	$21.77
	TME	$2.08
	Verical	$6.68–$36.87

Assets

Thumbnail

ESP32-S3-WROOM-1 Reference Design.png

id=ESP32-S3-WROOM-1 Reference Design

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.