# ESP32-WROOM-32E Reference Design ## Description This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design ## Project Details - **Owner:** alwolfxx - **Created:** 2/10/2024 - **Last Updated:** 2/11/2024 - **Visibility:** Public - **License:** https://creativecommons.org/licenses/by/4.0/ ## Key Components ### U1 — [Arduino Nano](https://www.flux.ai/vasyl/arduino-nano~0ia.md) - Part Type: Evaluation Board - Manufacturer Part Number: Arduino Nano - Datasheet URL: https://media.digikey.com/pdf/Data%20Sheets/Arduino%20PDFs/A000005.pdf - Manufacturer Name: Arduino **Pins:** - +5V [pin 27] - 3V3 [pin 17] - A0 [pin 19] - A1 [pin 20] - A2 [pin 21] - A3 [pin 22] - A4 [pin 23] - A5 [pin 24] - A6 [pin 25] - A7 [pin 26] - AREF [pin 18] - COM/GND [pin 4] - COM/GND__1 [pin 29] - D0/RX [pin 2] - D1/TX [pin 1] - D10 [pin 13] - D11/MOSI [pin 14] - D12/MISO [pin 15] - D13/SCK [pin 16] - D2 [pin 5] - D3 [pin 6] - D4 [pin 7] - D5 [pin 8] - D6 [pin 9] - D7 [pin 10] - D8 [pin 11] - D9 [pin 12] - RESET [pin 3] - RESET__1 [pin 28] - VIN [pin 30] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/alwolfxx/esp32-wroom-32e-reference-design~fi](https://www.flux.ai/alwolfxx/esp32-wroom-32e-reference-design~fi).* --- *Generated from [https://www.flux.ai/alwolfxx/esp32-wroom-32e-reference-design~fi](https://www.flux.ai/alwolfxx/esp32-wroom-32e-reference-design~fi)*