# Guitar Pedal Template 5x5c ## Description Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template ## Project Details - **Owner:** alfox12 - **Created:** 8/12/2024 - **Last Updated:** 8/12/2024 - **Visibility:** Public - **Copies:** 1 ## Key Components ### J2 — [PJ-102B](https://www.flux.ai/jecstronic/pj-102b.md) - Manufacturer Part Number: PJ-102B - License: https://creativecommons.org/licenses/by/4.0/ - Datasheet URL: https://www.cuidevices.com/product/resource/pj-102b.pdf - Manufacturer Name: CUI Devices - Part Type: Connector **Pins:** - ~ [pin 2] - ~ [pin 1] - ~ [pin 3] ### J4 — [1054500101](https://www.flux.ai/adrian95/1054500101.md) - Manufacturer Part Number: 1054500101 - Manufacturer Name: Molex - Part Type: Connector - Datasheet URL: https://www.molex.com/pdm_docs/ps/PS-105448-001.pdf - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - CC1 [pin A5] - CC2 [pin B5] - D1- [pin A7] - D1+ [pin A6] - D2- [pin B7] - D2+ [pin B6] - GND1 [pin A1] - GND2 [pin A12] - GND3 [pin B1] - GND4 [pin B12] - RX1- [pin B10] - RX1+ [pin B11] - RX2- [pin A10] - RX2+ [pin A11] - SBU1 [pin A8] - SBU2 [pin B8] - SHIELD [pin S3] - SHIELD [pin S2] - SHIELD [pin S4] - SHIELD [pin S1] - TX1- [pin A3] - TX1+ [pin A2] - TX2- [pin B3] - TX2+ [pin B2] - VBUS1 [pin A4] - VBUS2 [pin A9] - VBUS3 [pin B4] - VBUS4 [pin B9] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/alfox12/guitar-pedal-template-5x5c](https://www.flux.ai/alfox12/guitar-pedal-template-5x5c).* --- *Generated from [https://www.flux.ai/alfox12/guitar-pedal-template-5x5c](https://www.flux.ai/alfox12/guitar-pedal-template-5x5c)*