M12 Proximity Sensor

Worked for 38 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for 1 min 40 sec — Creating documentation and estimates
2/6 Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Rename project, create specification, and record initial requirements/power budget

Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Add main components and supporting passives to the schematic

Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators

Create firmware/regulatory/bring-up project files

Run schematic/design checks and fix actionable issues

Thought for a moment
A

ajaykumar1988

m12 proximity

image.png

flux

No design changes were made; the project is still empty. I can’t build the requested M12 inductive proximity sensor circuit because no ACUs are currently available.
Remaining work: confirm the M12 sensor requirements—supply voltage, sensing distance/target, connector pinout, and PNP/NPN plus NO/NC output—then create and verify the schematic and PCB layout.
Sign up to send
No schematic yet

Talk to Flux to get started.