# Adafruit DRV2605L Haptic Controller Breakout ## Description The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors - buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, 'click' effects, different buzzer levels, or even having the vibration follow a musical/audio input. ## Project Details - **Owner:** ahmetonurkaplan - **Created:** 9/12/2025 - **Last Updated:** 9/12/2025 - **Visibility:** Public ## Key Components ### J1 — [Connector 01x05](https://www.flux.ai/adrian95/pin-header-01x05-254mm-vertical~cas.md) - Manufacturer Name: Texas Instruments Inc. - Datasheet URL: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=640452&DocType=Customer+Drawing&DocLang=English - Manufacturer Part Number: 640452-5 - Part Type: Connector **Pins:** - 1 - 2 - 3 - 4 - 5 ### OUT- — [Test Point](https://www.flux.ai/jharwinbarrozo/1p25mm-smd-test-point~b9.md) **Pins:** - P1 ### OUT+ — [Test Point](https://www.flux.ai/jharwinbarrozo/1p25mm-smd-test-point~b9.md) **Pins:** - P1 ### U1 — [DRV2605LDGSR](https://www.flux.ai/jharwinbarrozo/drv2605ldgsr~ugx.md) - Manufacturer Name: Texas Instruments Inc. - Manufacturer Part Number: DRV2605LDGSR **Pins:** - EN - GND - IN/TRIG - OUT- - OUT+ - SCL - SDA - VDD - VDD/NC - VREG *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/ahmetonurkaplan/adafruit-drv2605l-haptic-controller-breakout~s3](https://www.flux.ai/ahmetonurkaplan/adafruit-drv2605l-haptic-controller-breakout~s3).* --- *Generated from [https://www.flux.ai/ahmetonurkaplan/adafruit-drv2605l-haptic-controller-breakout~s3](https://www.flux.ai/ahmetonurkaplan/adafruit-drv2605l-haptic-controller-breakout~s3)*